User Manual for TELESIN 1.2M/3M Carbon Fiber Selfie Stick
Quick guide for the TELESIN 1.2M/3M Carbon Fiber Selfie Stick. Learn how to extend, mount your camera, adjust angles, and maintain your selfie stick for optimal performance.
Table of contents
Quick guide from the manual
The TELESIN Carbon Fiber Selfie Stick is designed for action cameras, smartphones, and small cameras. It features a twist-lock mechanism for height adjustment and is available in 1.2M and 3M versions. Important: The maximum load capacity is 0.5kg. Do not exceed this weight to prevent damage or instability. Always ensure all twist lock rings are fully tightened before use.
Product Structure and Controls
- Carbon Fiber Pole: Telescopic design for length adjustment.
- Non-Slip Handle: Textured rubber grip for secure holding.
- Twist Lock Rings: Used to lock and unlock each telescopic section.
- Top Mount: Universal action camera mount compatible with GoPro, DJI, and Insta360, plus a 1/4" screw adapter.
- End Cap: Protects the bottom of the pole and provides a stable base.
Operation
Extending the Selfie Stick
- Hold the handle firmly.
- Twist the topmost lock ring counterclockwise to unlock the section.
- Pull the section to the desired length.
- Twist the lock ring clockwise to secure it.
- Repeat for all sections as needed.
Mounting Your Device
- Action Camera: Attach the mount directly to the top interface, align pins, and tighten the thumb screw.
- Smartphone / Small Camera: Screw the 1/4" adapter into the top mount, then attach your phone clamp or camera.
Adjusting Shooting Angle
The top mount supports 360° horizontal rotation and 90° vertical tilt. Loosen the thumb screw to adjust the angle, then retighten to lock the position.
Folding for Storage
- Loosen all lock rings counterclockwise.
- Push each section back into the handle starting from the top.
- Tighten all lock rings to keep the stick compact.
- Store in a dry, cool place.
Maintenance and Care
- Clean the pole and handle with a dry, soft cloth. Avoid water, chemicals, or abrasive cleaners.
- Store in a cool, dry environment.
- Lubricate twist lock rings with a small amount of silicone grease if they become stiff.
- Inspect the mount and lock rings regularly for wear or damage.
Safety Notes
- Do not use in strong winds or on unstable surfaces.
- Keep away from children to avoid injury.
- Do not use as a walking stick or for any purpose other than photography/videography.
- When using the 3M version, be cautious of overhead obstacles like power lines or tree branches.
Practical help
Common problems
Ensure all twist lock rings are fully tightened clockwise.
Tighten the thumb screw on the top mount and check for thread wear.
Clean the inner surface of each section with a dry cloth to remove dust or debris.
Avoid overloading (max 0.5kg), use in calm conditions, and keep the stick vertical.
Before use
- Check that all twist lock rings are tightened securely.
- Verify that the device weight does not exceed 0.5kg.
- Ensure the mount interface matches your device (Action cam mount or 1/4" thread).
- Inspect the pole for any signs of damage or wear.
Specs in practice
- Max Load Capacity
- 0.5kg. Do not exceed this limit to avoid equipment damage.
- 1.2M Version
- 5 sections, folded length ~38cm, max extended 120cm.
Model compatibility
- Compatible with GoPro Hero series, DJI Osmo Action, Insta360.
- Compatible with smartphones (requires phone clamp) and small cameras with 1/4" thread.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.