Inflatable Camping Tent 17.2m² 044BG User Guide

Quick guide from the manual

This document provides essential instructions for setting up and maintaining the 044BG Inflatable Camping Tent. The tent features an integral inflatable column structure, allowing for quick assembly. Key requirements include selecting a flat, safe location and ensuring the tent is properly inflated until the barometer needle reaches the green zone. Please note that this tent is designed for temporary outdoor shelter and is not suitable for long-term use or extreme weather conditions.

Accessories

Before beginning assembly, ensure all components are present:

• Stakes (16)
• Windproof rope (6, already tied on)
• Projection Screen (1)
• Air Pump (1)
• Removable floor cloth (1)
• Storage Bag (1)

Installation

1. Preparation: Tile the tent on a flat surface. Drive the ground nails at the four corners of the bottom of the tent and install the pump.
2. Inflation: Locate the black inflation valve, remove the valve lid, and connect the pump. Inflate the tent until the barometer needle moves into the green area.
3. Securing: Insert the remaining ground nails, pull the wind ropes, and fix them properly to ensure stability.
4. Finishing: Support the curtain using the 2 hallway poles and wind ropes. Note: Please put down the curtain during rainy days.

Precautions and Safety

To ensure safety and prolong the life of your tent, please adhere to the following guidelines:

• Weather: The tent is for temporary use only. It can withstand moderate weather but should not be used during extreme conditions such as heavy rain, strong winds, or snowstorms.
• Location: Choose a flat camping site on the lee side. Avoid setting up near water, trees, on mountain tops, under cliffs, in valleys, or on beaches.
• Fire and Sharp Objects: Keep the tent away from fire and avoid contact with sharp objects.
• Ventilation: Always pay attention to ventilation inside the tent.

Maintenance and Storage

Proper maintenance is essential for the longevity of the tent:

• Ensure the tent is set up correctly (full and flat) using the provided ground nails and wind ropes.
• After use, dry the tent thoroughly before storing it to prevent damage.
• Store the tent in a dry state.

Support

If you find any missing parts or damage upon inspection, please contact the manufacturer. Provide the letter of the missing parts or clear photos of any damage to receive the best solution.