User Manual for VEVOR Drill Powered Chimney Sweeping Brush

Quick guide from the manual

This chimney sweeping brush is designed to be powered by a professional drill to effectively remove soot and creosote from chimneys. Before use, ensure you have a drill with a safety auxiliary handle and that the stove and chimney have completely cooled down.

Safety & Warnings

• Use professional drills equipped with a safety auxiliary handle that can stop the drill immediately if necessary.
• Drill requirements: Speed range of 350rpm to 2000rpm; 24V or above for DC drills, or 500W for AC drills.
• Rotate the brush gradually and evenly. Avoid sudden trigger presses, as this creates high torque that can damage the rods and the chimney.
• Do not grip the rods too tightly, as this may pull your gloves off.
• Keep the rods as straight as possible when connecting them.
• Never keep the rods spinning in the chimney if you are not moving them up or down, as friction can cause the rods to heat up and potentially break.
• Perform sweeping only when the stove and chimney have cooled down.

Operation

1. Connect the rods one by one.
2. Attach the bristle head to the rods.
3. Insert the brush into the flue.
4. Slide the rod into the flue.
5. Attach the drill to the rod.
6. Start cleaning the chimney.

Storage

Store the chimney brush in a cool, dry place.

Application

This tool is suitable for flues of various shapes and sizes. It effectively sweeps away soot and creosote buildup inside the chimney or on the roof, which helps prevent flue fires and improves airflow for more efficient burning in the fireplace.

Technical Specifications

The system consists of 1-meter long rods with a diameter of 12.3mm. Available models range from 6 rods (6m length) up to 12 rods (12m length), with various 'A' variants available. Net weights vary by model from 1.375kg to 2.607kg.