Home Appliances / Cooktops Hobs
User Manual for Vox Electronics SET2110400W Electric Hob
Comprehensive user guide for the Vox Electronics SET2110400W electric hob, covering installation, safety instructions, touch control operation, heat settings, maintenance, and troubleshooting.
Quick answers from the manual
Quick answer
- The Vox Electronics SET2110400W is an electric hob controlled via touch buttons. To operate, turn on the unit by holding the On/Off button for 1 second, select a cooking zone, and adjust the heat level from 1 to 9. p. 13, 84
Key actions
- Turning the hob on p. 13, 84
- Activating Child Lock p. 14, 85
First start
- Ensure installation is performed by an authorized technician and the unit is properly earthed. p. 11, 82
Show 4 more answers Show less
Problems and fixes
Hob switches off and 'F' flashes
Dry the controls or remove any object resting on them.
p. 18, 89Maintenance and reset
- Clean the ceramic glass with a cream or liquid cleaner; do not use abrasive materials or steam cleaners. p. 17, 88
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Number of cooking zones | 4 | Total heating elements available. | p. 19 |
Where to find it in the PDF
- Safety Instructions p. 4, 75
- Installation p. 9, 80
- Operation p. 13, 84
- Cleaning p. 16, 87
- Troubleshooting p. 18, 89
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This manual provides essential information for the safe installation and operation of your Vox Electronics SET2110400W electric hob. Always read the safety instructions before use. The appliance must be installed by an authorized technician. Ensure the hob is properly earthed and connected to the power supply according to local regulations.
Safety Instructions
- The appliance and its accessible parts become hot during use. Keep children under 8 years old away unless supervised.
- Never leave the hob unattended when cooking with oil or fat. In case of fire, switch off the appliance and cover the flame with a lid or fire blanket. Never use water to extinguish oil fires.
- Do not store items on the cooking surfaces.
- If the surface is cracked, switch off the appliance immediately to avoid electric shock.
- Do not use steam cleaners or abrasive cleaning materials.
Installation
The hob must be installed by an authorized technician. Ensure the worktop and surrounding furniture can withstand temperatures above 100°C. Maintain the required safety distances from overhead cupboards or hoods (minimum 65cm with hood, 70cm without). The appliance must not be installed directly above a dishwasher, fridge, freezer, or washing machine.
Operation
The hob is operated via touch controls. To turn on, hold the On/Off button for at least 1 second. Select a heater using the Activate/Deactivate button, then adjust the heat level (1-9) using the plus and minus buttons. The hob features heat boost, dual/triple zone activation, and a child lock function.
Cleaning and Maintenance
Always switch off the appliance and let it cool before cleaning. Use cream or liquid cleaners that do not contain particles. Do not use caustic pastes, abrasive powders, or wire wool. Clean stainless steel parts with a soft, damp cloth and dry thoroughly. Do not leave acidic substances like vinegar, lemon juice, or tomato juice on stainless steel surfaces for long periods.
Troubleshooting
If the hob does not work, check the household fuse and power supply. If the hob switches off during use and 'F' flashes, the controls may be wet or covered by an object. If the child lock is active, the controls will not respond; deactivate the child lock to resume operation.
Practical help
Common problems
Hob or cooking zones cannot be switched on
Check the household fuse and ensure there is no power cut.
Hob switches off during use and 'F' flashes
The controls are wet or an object is resting on them. Dry the controls or remove the object.
Controls do not work and child lock LED is on
The child lock is active. Deactivate the child lock.
Before use
- Ensure the appliance is installed by an authorized technician.
- Verify that the electrical supply matches the appliance's voltage rating.
- Ensure the hob is properly earthed.
- Check that the worktop and surrounding materials are heat-resistant.
- Ensure the bottom of pans are clean and dry before placing them on the hob.
Show more Show less
Specs in practice
- Residual Heat Indicator ('H')
- Indicates the glass is still hot (above 60°C) even after the heater is switched off.
Images and diagrams
- The control panel layout shows the On/Off button, heat adjustment buttons, and zone selection indicators.
- Installation diagrams show the required cutout dimensions and bracket placement.
- Wiring diagrams illustrate the terminal box connections.
Model compatibility
- Use only flat-bottomed pans with a sufficiently thick base.
- Do not use pans with rough bottoms as they can scratch the ceramic glass.
- Match the pan diameter to the cooking zone size for energy efficiency.
Manual page author
David Miller
Documentation analyst