Operating Instructions for WeTeLux 10W LED Floodlight

Product Overview

The WeTeLux 10W LED floodlight is a high-efficiency lighting solution designed for both indoor and outdoor use. It provides a bright 6500K light output of 800 lumens, making it suitable for illuminating house entrances, driveways, and similar areas. The unit features an IP65 rating, ensuring it is dustproof and protected against water jets from any angle.

Safety Information

Important: This device must be installed by a qualified electrician in accordance with local regulations. Improper installation poses a risk of electric shock and fire. The unit must be connected to a 230V AC / 50Hz power supply and requires a properly connected earth (ground) wire. Do not operate the floodlight if the housing or glass is damaged; the light source is non-replaceable, and the entire unit must be disposed of if damaged.

Maintain a minimum distance of 1 meter between the front of the floodlight and any illuminated objects. Do not cover the unit during operation, and avoid mounting it near flammable surfaces or materials. The device is not intended for continuous professional use or operation at altitudes exceeding 2000 meters.

Installation

Installation must be performed in a voltage-free state. Simply turning off the light switch is insufficient; you must disconnect the power at the circuit breaker or remove the fuse. Ensure the mounting surface is stable and free from vibrations. The power cable should be routed through the waterproof cable gland to prevent moisture ingress. If the light glows faintly when switched off, swap the L and N wires in the terminal block.

Maintenance and Cleaning

The floodlight is maintenance-free. Clean the housing only with a dry or lightly moistened cloth. Do not use aggressive chemicals or abrasive materials. If the glass is broken, it must be replaced immediately. For any technical issues, contact the manufacturer's customer service.