Lighting / Outdoor Landscape
Wetelux 10W LED Floodlight User Manual
Comprehensive user manual for the Wetelux 10W LED floodlight with 150° PIR motion sensor, covering installation, safety, and operation.
Table of contents
Manual images
Jump to the sectionProduct Overview
The Wetelux 10W LED floodlight is a high-efficiency lighting solution designed for both indoor and outdoor use. It features an integrated 150° PIR motion sensor, making it ideal for illuminating house entrances, driveways, and other areas requiring automated security or convenience lighting. The unit is rated IP44, providing protection against splashing water.
Safety Information
Installation must be performed by a qualified electrician in accordance with local regulations. The unit requires a 230V~ / 50Hz power supply and must be connected to a protective earth (ground) cable. Do not operate the floodlight if the housing or glass is damaged. Ensure a minimum distance of 1 meter from the front of the light to any other objects. The device is not intended for use in explosive atmospheres or near flammable materials.
Installation
The floodlight must be mounted on a stable surface. During installation, ensure the power supply is completely disconnected at the circuit breaker. The unit features a waterproof cable gland for secure wiring. If the light glows faintly when switched off, swap the L and N wires in the terminal block. Ensure the motion sensor is positioned to effectively detect movement in the desired area.
Operation and Adjustments
The motion sensor can be adjusted both horizontally and vertically. Three control knobs allow for customization: SENS (motion sensitivity), TIME (illumination duration from 10 seconds to 10 minutes), and LUX (light sensitivity, allowing operation only at night or during the day). The detection range is temperature-dependent, with greater range in colder environments.
Maintenance
Clean the housing with a dry or lightly moistened cloth. Do not use aggressive chemicals or abrasives. Keep the motion sensor lens clean at all times to ensure reliable operation.
Practical help
Common problems
The floodlight glows faintly when switched off.
Swap the L and N wires in the terminal block.
The motion sensor triggers randomly without movement.
Ensure the unit is not located near strong radio transmitters, such as amateur radio operators or mobile phone masts.
Before use
- Verify mains voltage matches the type label (230V~ / 50Hz).
- Ensure a protective earth (ground) cable is available and connected.
- Check that the mounting surface is stable and vibration-free.
- Ensure the installation location is at least 5m away from swimming pools or ponds.
- Confirm the unit is not mounted near flammable surfaces or objects.
Specs in practice
- 150° Detection Angle
- The field of view of the PIR motion sensor.
- 10±5s – 10±1min
- Adjustable duration the light stays on after motion is detected.
Images and diagrams
- The unit features three adjustment knobs: SENS (sensitivity), TIME (duration), and LUX (day/night threshold).
- The motion sensor can be tilted vertically by loosening the locking screw and rotated horizontally by turning the sensor head.
Model compatibility
- Not dimmable.
- Not suitable for continuous professional operation.
- Requires a 10/16A fuse and an earth leakage circuit breaker (FI switch).
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.