Home Appliances / Small Kitchen Appliances
Camry CR 1254 Electric Kettle User Manual
Quick guide for the Camry CR 1254 electric kettle. Learn how to operate, clean, and descale your 1.7L kettle safely with this concise manual.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This guide provides essential instructions for operating the Camry CR 1254 electric kettle. Always read the safety instructions before use to ensure safe operation.
Product Description
- 1 - Housing
- 2 - ON/OFF switch
- 3 - Indicator lamp
- 4 - Rotating base
- 5 - The lid
- 6 - Handle
- 7 - Lid unlock
First Use
- Fill the kettle with water to the MAX level.
- Boil the water and discard it.
- Repeat this process three times to remove any manufacturing odor.
Operation
- Place the appliance on a flat, heat-resistant surface.
- Fill the kettle with water, ensuring the heating element is fully covered. Do not exceed the MAX level or go below the MIN level.
- Plug the kettle into a 220-240V outlet and press the ON/OFF switch. The indicator lamp will light up.
- The kettle will switch off automatically after the water boils.
- Ensure the kettle is switched off before removing it from the base.
- Keep the lid closed during the boiling process for the automatic switch-off to function.
Cleaning and Maintenance
Regularly descale the kettle using appropriate descaling agents. Failure to descale regularly may cause damage to the heating element and void the warranty. Do not use aggressive detergents that may damage the housing or remove markings. Do not wash the base directly in water; wipe it with a dry cloth.
Safety Instructions
- Use indoors only.
- Do not operate the kettle without water.
- Do not open the lid while the water is boiling or immediately after.
- Keep out of reach of children under 8 years old.
- Do not use with external timers or separate remote control systems.
- If the kettle is overfilled, it may spurt boiling water.
Technical Data
Capacity: 1.7L. Voltage: 220-240V ~50/60Hz. Power: 1850-2200W.
Manufacturer information
Adler Europe Group
Practical help
Common problems
Kettle does not switch off automatically
Ensure the lid is fully closed and the filter is in place.
Kettle does not turn on
Check if the kettle is empty or has insufficient water; wait a few minutes for it to cool down before refilling and restarting.
Unpleasant smell on first use
Boil water and discard it three times to remove manufacturing odors.
Before use
- Check the power cable condition.
- Place the kettle on a flat, stable, heat-resistant surface.
- Fill with fresh water between the MIN and MAX levels.
- Ensure the lid is securely closed.
- Ensure the heating element is fully covered with water.
Specs in practice
- Capacity: 1.7L
- Maximum volume of water the kettle can hold.
- Power: 1850-2200W
- The electrical power consumption range for boiling water.
- Voltage: 220-240V
- Compatible electrical supply standard.
Images and diagrams
- 1: Housing - The main body of the kettle.
- 2: ON/OFF switch - Used to start the boiling process.
- 3: Indicator lamp - Shows when the kettle is heating.
- 4: Rotating base - Allows the kettle to be placed in any position.
- 5: Lid - Must be closed during operation.
Model compatibility
- Intended for domestic use only.
- Not compatible with external timers or remote control systems.
- Use only with the provided base.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.