Home Appliances / Small Kitchen Appliances
User Manual for Adler AD 3134 Kitchen Scale
Quick guide for the Adler AD 3134 kitchen scale. Learn how to weigh ingredients, use the tare function, set the timer, monitor ambient temperature, and replace batteries.
Table of contents
Quick guide from the manual
This manual provides instructions for the Adler AD 3134 kitchen scale. The device is intended for household use only. Key features include weighing, a tare function, a built-in timer/alarm, and an ambient thermometer. Ensure the scale is placed on a stable, flat surface away from strong electromagnetic fields and water.
Description of the device
The device consists of a bowl (2a) and a control panel (2b). The control panel features buttons for Z/T (3a), Unit (3b), T-SET (3c), and ON/OFF (3d). The display (4) shows the alarm symbol (4a), tare weight (4b), minus symbol (4c), zero symbol (4d), ambient temperature (4e), weight (4f), and weight unit (4g).
Battery replacement
To replace the batteries, remove the battery compartment cover on the bottom of the scale. Remove the old batteries and insert new ones. Close the cover securely.
Weighing
- Turn on the scale using the ON/OFF button (3d).
- Wait until the scale shows 0.0 and the reset symbol (4d).
- Place the object you want to weigh in the bowl (2a).
- Wait for the result to stabilize.
- Tare function: Place only the container on the scale and press the T button (3a). The scale will show 0.0 and the tare weight symbol (4b).
Using the timer
- Start the timer function by pressing the T-SET button (3c).
- Set the number of minutes using the 'up' (3a) and 'down' (3b) buttons.
- Confirm the minutes by pressing the T-SET button (3c).
- Set the number of seconds using the 'up' (3a) and 'down' (3b) buttons.
- Start the alarm function by pressing the T-SET button (3c).
- When the alarm is active, the alarm symbol (4a) will be visible on the display, along with the remaining time.
Thermometer
The thermometer displays the ambient temperature between 0 - 40°C.
Cleaning and maintenance
Gently wipe the scale with a dry or slightly damp cloth.
Troubleshooting
- Lo: Low battery.
- Err: Too much load weight.
Technical data
Power source: 2x LR03 (AAA) batteries.
Manufacturer information
Adler Europe Group
Practical help
Common problems
Display shows 'Lo'
The batteries are low and need to be replaced.
Display shows 'Err'
The weight on the scale exceeds the maximum capacity.
Before use
- Insert 2x AAA batteries into the compartment.
- Place the scale on a stable, flat, and dry surface.
- Ensure the scale is away from strong electromagnetic fields.
- Do not use the scale near water or inflammable materials.
Specs in practice
- Tare function
- Allows you to reset the scale to zero after placing a container, so only the weight of the ingredients is measured.
Images and diagrams
- Fig 1: Battery compartment location.
- Fig 2: Device components including bowl and control panel.
- Fig 3: Control panel buttons (Z/T, Unit, T-SET, ON/OFF).
- Fig 4: Display indicators (alarm, tare, zero, weight).
Model compatibility
- For household use only.
- Not suitable for use near water (e.g., shower, bathtub, washbasin).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.