General / Mounts Stands
Allen + Roth Mt Airy 1-Light Outdoor Coal Lantern Wall Mount
A stylish and durable 1-light outdoor wall-mounted lantern by Allen + Roth, designed for exterior lighting with a classic coal finish.
Table of contents
Product Overview
The Allen + Roth Mt Airy 1-Light Outdoor Coal Lantern is a wall-mounted lighting fixture designed to enhance the exterior of your home. This lantern combines a classic aesthetic with durable construction, suitable for various outdoor environments. Please ensure you read all safety instructions before beginning the installation process to prevent injury or damage to the product.
Safety Information
Safety is paramount when installing electrical fixtures. Always turn off the main power supply at the circuit breaker or fuse box before starting any work. Ensure that all electrical connections comply with local codes, ordinances, and the National Electric Code (NEC). If you are unsure about the installation process, consult a qualified electrician. Be careful not to damage or cut the wire insulation during installation, as contact with sharp edges can lead to electrical hazards.
Installation and Assembly
The assembly process is designed to be straightforward, with an estimated time of 10 to 15 minutes. Before starting, verify that all parts listed in the package contents are present. The installation involves mounting the crossbar to the outlet box, connecting the electrical wires using the provided wire connectors, and securing the fixture to the wall using the mounting screws and knurled knobs. Ensure the fixture is properly grounded using the provided ground screw.
Care and Maintenance
To keep your lantern looking its best, clean it periodically with a damp cloth or a mild window cleaner. Avoid using abrasive materials or harsh chemicals, as these can damage the finish of the fixture. If the light fails to operate, check the bulb, power supply, and wiring connections before seeking further assistance.
Troubleshooting
If you encounter issues with your lantern, such as the light not turning on, first check if the bulb is burned out and needs replacement. Verify that the power supply is turned on at the breaker. Inspect the wiring connections to ensure they are secure and free from defects. If the problem persists, test or replace the wall switch controlling the fixture.
Manufacturer information
Allen + Roth
Practical help
Common problems
The fixture does not light.
Replace the bulb, ensure power is on, check wiring connections, or test/replace the wall switch.
Before use
- Verify all parts are present against the package contents list.
- Ensure the main power supply is turned off at the circuit breaker.
- Check that you have the necessary tools for installation.
- Confirm electrical connections comply with local codes and NEC.
- Inspect wires for any damage to the insulation.
Images and diagrams
- Step 1-2: Assembly of the fixture arm and mounting hardware.
- Step 3: Attaching the crossbar to the outlet box.
- Step 4: Connecting electrical wires and grounding.
- Step 5: Securing the fixture to the wall mount.
- Step 6: Installing the light bulb.
Model compatibility
- Must be installed in accordance with local electrical codes and the National Electric Code (NEC).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.