Lighting / Fixtures
Artika Empress LED Flush Mount Light User Manual
Quick guide for the Artika Empress LED Flush Mount Light (12FM-EMC-W2WH). Includes installation steps, wiring instructions, CCT color temperature settings, and safety warnings.
Table of contents
Manual images
Click an image to enlargeQuick Guide
The Artika Empress LED Flush Mount Light is designed for residential indoor use. Before installation, ensure the main power is turned off at the circuit breaker. This fixture features Selectable White Technology (CCT), allowing you to choose between 3000K, 4000K, and 5000K color temperatures. If using a dimmer, it must be LED compatible.
Safety Warnings
- Electrical Shock Hazard: Always turn off the main electrical supply at the fuse box or circuit breaker before installation or maintenance.
- Professional Installation: It is recommended that this product be installed by a certified electrician. In some regions, this is a legal requirement.
- Dimmer Compatibility: If using a dimmer switch, ensure it is specifically compatible with LED lighting.
- Usage: For indoor and residential use only. Do not use outdoors.
Included Hardware
- Lock Washers (x2)
- Wire Connectors (x3)
- Junction Box Screws (x2)
- Base (x1)
- Diffuser (x1)
Required Tools: Screwdriver.
Installation
1. Light Fixture Screw Installation
Secure the junction box screws (C) with lock washers (A) into the junction box using a screwdriver.
2. Wire Connection
Connect the fixture wires to the house supply wires using the provided wire connectors (B):
- Ground wire (G): Connect to the house ground wire.
- Black (L): Connect to the house black (live) wire.
- White (N): Connect to the house white (neutral) wire.
3. Light Fixture Base Installation
Align the base (D) with the installed screws and secure it to the ceiling.
4. Diffuser Installation
Attach the diffuser (E) to the base (D) by rotating it into place.
Selectable White Technology (CCT)
The fixture allows you to adjust the color temperature. Locate the switch on the base (D) and slide it to select your preferred setting: 3000K (Warm White), 4000K (Cool White), or 5000K (Daylight).
Warranty and Support
Artika For Living Inc. offers a three-year limited warranty against manufacturing defects for residential use. The warranty is non-transferable and requires the original sales receipt. For support, visit www.artika.com, email [email protected], or call 1-866-661-9606 (Monday to Friday, 9 am - 5 pm EST).
Official resources from the manual
Manufacturer information
Artika
Practical help
Common problems
Light does not turn on
Check if the circuit breaker is on and ensure all wire connections are secure.
Flickering light
Ensure the dimmer switch being used is compatible with LED lighting.
Before use
- Turn off the main power at the breaker panel.
- Verify all hardware (A, B, C, D, E) is present.
- Ensure you have a screwdriver.
- Confirm compatibility with existing dimmer switch.
- Check that the installation location is indoors.
Specs in practice
- LED Compatible
- Requires a dimmer switch designed for LED loads to prevent flickering or damage.
Images and diagrams
- Wiring: Connect Ground to Ground, Black to Black (Live), and White to White (Neutral) using wire connectors.
Model compatibility
- Indoor use only.
- Residential use only.
- Requires LED-compatible dimmer if dimming is desired.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.