Lighting / Fixtures
User Manual for Artika 14VAN-TI-CR Tivoli LED Vanity Light
Quick guide for installing and using the Artika 14VAN-TI-CR Tivoli LED vanity light. Includes wiring diagrams, mounting instructions, and safety precautions.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides installation and safety instructions for the Artika Tivoli 14" LED vanity light. The fixture is intended for indoor residential use only. Professional installation by a certified electrician is recommended and may be required by local building codes.
Included Hardware
- Mounting bracket
- Wire connectors (3)
- Junction box screws (2)
- Canopy screws (2 + 1 extra)
- LED vanity light fixture
Safety Warnings
- Electrical Shock Hazard: Always turn off the main electrical supply at the circuit breaker before starting installation or maintenance.
- Dimmer Compatibility: If using a dimmer switch, it must be specifically compatible with LED lighting.
- Usage: For indoor, residential use only. Do not use outdoors.
Installation
Ensure you have a size 2 screwdriver before beginning.
Mounting Bracket Installation
Secure the mounting bracket to the junction box using the provided junction box screws.
Wiring Connection
Connect the fixture wires to the house supply wires using the provided wire connectors:
- White (N): Connect to the neutral wire.
- Black (L): Connect to the live wire.
- Ground (G): Connect to the ground wire.
Ensure all connections are secure and tucked neatly into the junction box before attaching the fixture canopy to the mounting bracket using the canopy screws.
Warranty and Support
Artika For Living Inc. offers a three-year limited warranty against manufacturing defects for residential use. The warranty is non-transferable and requires the original sales receipt. For support, contact Artika at 1-866-661-9606 or [email protected]. Customer service is available Monday to Friday, 9 am - 5 pm EST.
Manufacturer information
Artika
Practical help
Common problems
Light does not turn on
Verify that the circuit breaker is turned on and that all wire connections are secure.
Flickering light
Ensure the dimmer switch installed is compatible with LED lighting.
Before use
- Turn off the main electrical supply at the circuit breaker
- Verify you have a size 2 screwdriver
- Check if your dimmer switch is LED compatible
- Ensure the installation location is indoors
Specs in practice
- LED compatible dimmer
- The fixture requires a specific type of dimmer switch designed for LED loads to prevent flickering or damage.
Images and diagrams
- The wiring diagram illustrates the connection of the White (Neutral), Black (Live), and Ground wires using the provided wire connectors.
Model compatibility
- For indoor residential use only.
- Not suitable for outdoor installation.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.