Tools / Saws
Batavia 12V Cordless Combi Drill User Manual
Quick guide for the Batavia 12V Cordless Combi Drill (Model BT-CCD003). Includes operation, speed settings, torque adjustment, maintenance, and safety instructions.
Table of contents
Quick guide from the manual
This manual provides essential operating instructions for the Batavia 12V Cordless Combi Drill (Model BT-CCD003). Please note that the battery and charger are not included and must be purchased separately. Always read the full safety instructions before use.
Device Overview
The drill features a chuck, torque selector, mode selector, gear switch, forward/reverse switch, trigger switch, and an integrated LED work light.
Operation
Direction Control: Use the forward/reverse switch to set the rotation direction. Placing the switch in the center position locks the drill for safety.
Mode and Torque Selection: Use the mode selector to choose between screwing, drilling in masonry/concrete, or drilling in wood/metal. Adjust the torque selector to set the desired torque level; higher numbers provide higher torque.
Speed Settings: The drill has two speeds adjustable via the gear switch:
- Position 1: High torque, low speed. Ideal for large drilling diameters or screw driving.
- Position 2: Low torque, high speed. Ideal for fast drilling or small diameters.
Maintenance and Cleaning
Always remove the battery before performing any maintenance. Keep motor vents free from dust and debris to prevent overheating. Clean the tool regularly with a damp cloth and mild soap. Do not use solvents or cleaning agents that may damage plastic components.
Safety
Always wear appropriate personal protective equipment, including safety glasses, hearing protection, and a dust mask (FFP2 recommended). Ensure the workpiece is securely clamped. If the tool becomes excessively hot, stop immediately and allow it to cool.
Technical Data
- Speed: 0–400 / 1300 min-1
- Impacts per Minute: 0–6000 / 19500 min-1
- Chuck Capacity: 10 mm
- Max Torque: 28 Nm
- Weight: 0.84 kg
Manufacturer information
Batavia
Practical help
Common problems
Tool becomes excessively hot during use.
Stop using the tool immediately and allow it to cool. Cooling can be accelerated by running the drill at maximum speed without load.
Motor slips before the screw is fully tightened.
Select a higher torque setting on the torque selector.
Drill will not start.
Check if the forward/reverse switch is in the center (locked) position.
Before use
- Check the machine for transport damage.
- Ensure the battery is charged (battery not included).
- Ensure the drill bit is securely fixed in the chuck.
- Check for hidden utility lines (gas, water, electricity) in the workpiece.
- Secure the workpiece with clamps or a vice.
- Ensure the forward/reverse switch is in the desired position.
Specs in practice
- Torque (28 Nm)
- The rotational force applied by the drill; higher settings are for harder materials or larger screws.
- Speed 1 (0-400 min-1)
- Low speed, high torque setting for heavy-duty tasks like driving large screws.
- Speed 2 (0-1300 min-1)
- High speed, low torque setting for fast drilling in lighter materials.
Model compatibility
- Requires Batavia 12V battery (Art. No: 7064221).
- Requires Batavia charger (Art. No: 7064222 or 7064223).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.