Lighting / Fixtures
User Manual for BEGA 24617K3 Wall Luminaire
Comprehensive user guide for the BEGA 24617K3 wall luminaire. Includes installation instructions, technical specifications, safety guidelines, and maintenance procedures.
PDF source: Français · summary: English
Quick answers from the manual
Quick answer
- The BEGA 24617K3 is a wall luminaire with two-sided light output. It requires installation by a qualified electrician and is rated IP65 for outdoor use. p. 1
Key actions
- Installation p. 2
- Cleaning p. 3
First start
- Ensure the desiccant bag remains inside the housing. p. 3
Show 3 more answers Show less
Maintenance and reset
- Clean regularly with solvent-free cleansers; do not use high-pressure cleaners. p. 3
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power | 19 W | Luminaire connected wattage | p. 2 |
| Protection | IP65 | Dust-tight and protection against water jets | p. 1 |
| Impact Strength | IK05 | Protection against mechanical impacts < 0.7 joule | p. 1 |
Where to find it in the PDF
- Product Description p. 1
- Installation p. 2
- Maintenance p. 3
Table of contents
Important Information
The BEGA 24617K3 is a wall luminaire designed for architectural lighting with two-sided light output. Installation and commissioning must be performed by a qualified electrician in accordance with national safety regulations. The luminaire is rated IP65 (dust-tight and protected against water jets) and features BEGA Thermal Control for temperature regulation.
Product Description
The luminaire is constructed from aluminium alloy, aluminium, and stainless steel with BEGA Unidure coating technology. It features a matt safety glass and a reflector made of pure aluminium. The unit is designed for wall mounting with a specific mounting plate.
Installation
Installation must be carried out by a qualified electrician. Follow these steps:
- Undo the hexagon socket head screws (wrench size 3mm) to disassemble the mounting plate.
- Pass the power connecting cable through the cable entry in the mounting plate.
- Fix the mounting plate to the mounting surface using suitable fixing material.
- Make the earth conductor connection and electrical connection to the connecting terminal.
- Push the plug into the coupler until it reaches the stop.
- Place the luminaire housing onto the mounting plate and secure it. Ensure the gasket is positioned correctly.
Maintenance and Cleaning
- Cleaning: Clean the luminaire regularly using solvent-free cleansers. Do not use high-pressure cleaners.
- Desiccant Bag: Do not remove the desiccant bag located inside the luminaire housing; it is essential for absorbing residual moisture.
- LED Module Replacement: The LED module can be replaced by qualified persons using standard tools. Ensure the system is disconnected from power before opening.
Technical Data
- Connected Wattage: 19 W
- Module Connected Wattage: 16.8 W
- Protection Class: IP65
- Safety Class: I
- Impact Strength: IK05 (< 0.7 joule)
- Ambient Temperature: ta max = 50 °C
Manufacturer information
BEGA
Practical help
Common problems
Moisture inside the housing
Do not remove the desiccant bag located inside the luminaire housing, as it is required to absorb residual moisture.
Cleaning the luminaire
Use only solvent-free cleansers. Do not use high-pressure cleaners as they may damage the unit.
Before use
- Ensure installation is performed by a qualified electrician.
- Verify the power supply is 220-240V, 0/50-60Hz.
- Check that the gasket is positioned correctly during assembly to maintain IP65 rating.
- Ensure the earth conductor is properly connected.
Show more Show less
Specs in practice
- Safety Class I
- Requires an earth connection for safe operation.
Images and diagrams
- The mounting plate features 2 fixing holes with a spacing of 62 x 95mm.
- The electrical connection uses a plug-in terminal system.
Model compatibility
- Compatible with 220-240V 0/50-60Hz power supply.
- Suitable for wall mounting.
Manual page author
Emily Carter
User documentation editor