Power / Batteries Chargers
Behringer PB1000/PB600 Pedal Board User Guide
Quick setup guide for the Behringer PB1000 and PB600 pedal boards, covering connection procedures, power supply integration, and technical specifications.
Table of contents
Quick guide from the manual
The Behringer PB1000 and PB600 are lightweight pedal boards designed to transport and power your stompbox collection. The PB1000 accommodates up to 12 pedals, while the PB600 holds up to 6. Both models feature an integrated 1.7 A power supply and include necessary cabling for daisy-chaining power to your pedals.
Connections
The pedal board features a standardized connection panel for your instrument and amplifier setup:
- INPUT: Connect your instrument cable here (use high-quality cables).
- TO EFFECTS: Sends the instrument signal to your first effects pedal.
- FROM EFFECTS: Connect the output signal from your effects chain here.
- OUTPUT TO AMP: Sends the final signal to your amplifier(s).
- 9 V: Connect the included 9 V power supply here.
- DC OUT: Use the included daisy-chain cable to distribute power to all your pedals.
Safety Instructions
To ensure safe operation, observe the following:
- Do not use the device near water or install it near heat sources.
- Use only authorized attachments and accessories.
- Do not attempt to service the product yourself. Contact qualified service personnel for repairs, especially if the power cord or plug is damaged.
Specifications
Both models utilize a 9 V, 1.7 A switching adaptor with a 2 mm DC jack (center negative). Power consumption is 2 mA. The PB1000 measures 19.8 x 26.1 x 4.5 inches (5.6 kg), and the PB600 measures 13 x 26.1 x 4.4 inches (3.8 kg).
Manufacturer information
Behringer
Practical help
Common problems
No power to pedals
Ensure the 9 V power supply is connected to the 9 V input and the daisy-chain cable is properly connected to the DC OUT port and all pedals.
Signal issues or noise
Verify that you are using high-quality instrument cables for all connections and ensure the signal chain is correctly routed from TO EFFECTS to FROM EFFECTS.
Before use
- Ensure you have the correct 9 V power adaptor for your region.
- Check that all instrument cables are high-quality to prevent signal loss.
- Verify the number of pedals fits the board capacity (12 for PB1000, 6 for PB600).
- Confirm the power supply is connected to a stable power source.
Specs in practice
- 1.7 A Power Supply
- The total current capacity available to power your pedals.
- Center Negative
- The polarity of the DC power connector; ensure your pedals are compatible with this standard.
Model compatibility
- Designed for pedals requiring 9 V DC power.
- Daisy-chain cable included for powering multiple stompboxes.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.