Assembly Guide for Belleze 014-HG-41304-2 End Table

Quick guide from the manual

This document provides assembly instructions for the Belleze 014-HG-41304-2 end table. The estimated assembly time is 120 minutes, and it is recommended that two people perform the assembly. Ensure all parts are present before beginning. Assemble on a soft surface like a carpet or rug to prevent scratches.

Safety and weight limits

• Maximum load for the top panel: 50 lb.
• Maximum load for the storage shelf: 20 lb.
• Maximum load for the drawer: 10 lb.
• Keep small components, plastic bags, and packaging film away from children and pets to avoid choking or suffocation hazards.
• Do not climb or step on the product.

Assembly instructions

The assembly process involves 21 steps, including attaching cam bolts, installing slide brackets, assembling the frame, attaching legs, and installing the drawer. Use a screwdriver (not included) for assembly. Ensure all hardware is installed perpendicular to the opening and do not overtighten screws to avoid damaging the MDF material.

Furniture care and maintenance

• Tighten all bolts and screws within the first 2 weeks of assembly.
• Check the tightness of all bolts every 2 months and tighten if necessary.
• Clean surfaces with a lightly dampened cloth and mild soap if needed.
• Do not use bleach or alcohol for cleaning.
• Avoid water damage, as MDF can swell and distort; dry immediately if wet.
• Do not apply wood treatments to MDF parts.