Home Appliances / Range Hoods
Installation Manual for Belling Cookcentre 110PYR 110cm Chimney Cooker Hood
Comprehensive installation guide for the Belling Cookcentre 110PYR 110cm chimney cooker hood, covering mounting, ducting, and filter setup.
Table of contents
Product Overview
The Belling Cookcentre 110PYR is a 110cm chimney-style cooker hood designed for effective kitchen ventilation. This manual provides detailed instructions for both ducted (extraction) and recirculating installation modes.
Safety and Preparation
Before beginning the installation, ensure you have read the safety information provided in the main user manual. Installation should be performed by qualified personnel. Always wear protective gloves during the installation process to prevent injury from sharp edges. Ensure the hood is mounted at a minimum distance of 65 cm from the cooking surface.
Installation Modes
The hood can be installed in two ways: Extraction Mode, where air is vented outside using a ducting pipe (120mm or 150mm diameter), or Recirculation Mode, where air is filtered and returned to the kitchen. Recirculation mode requires the use of charcoal filters (W) and a specific air deflector.
Installation Steps
The installation process involves marking the wall for the mounting brackets, drilling holes, and securing the hood body (A) to the wall. The chimney sections (B and C) are then assembled and attached to the hood. If using recirculation mode, the charcoal filters must be installed onto the motor unit. Ensure all screws (L, N) and wall plugs (I) are used as specified in the diagrams to guarantee a secure fit.
Maintenance
Regular maintenance is essential for optimal performance. This includes cleaning or replacing the grease filters (Z) and replacing the charcoal filters (W) periodically if the unit is used in recirculation mode.
Manufacturer information
Belling
Practical help
Common problems
Hood not extracting properly
Check if the ducting is blocked or if the charcoal filters are saturated and need replacement.
Unstable mounting
Ensure all 8 wall plugs (I) and screws (L) are correctly installed and tightened according to the mounting template.
Before use
- Wear protective gloves during installation.
- Verify the minimum safety distance of 65 cm from the hob.
- Determine if you are using extraction or recirculation mode.
- Ensure you have the correct ducting diameter (120mm or 150mm) for extraction.
- Check that all mounting hardware (screws, plugs, brackets) is present.
Specs in practice
- Minimum distance
- 65 cm from the cooking surface for safety and performance.
- Ducting diameter
- Supports 120mm or 150mm pipes for extraction mode.
Model compatibility
- Charcoal filters (W) are required only for recirculation mode.
- Air deflector is required for recirculation mode.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.