Bestway Hydro Force Arrow Elite X1 Inflatable Kayak
Quick guide for the Bestway Hydro Force Arrow Elite X1 inflatable kayak. Includes setup instructions, inflation pressure, safety warnings, maintenance, and storage tips.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Bestway Hydro Force Arrow Elite X1 is a 1-person inflatable kayak. Before use, ensure all components are inspected for damage. The kayak must be inflated to a recommended working pressure of 0.7 bar (10 psi). Do not exceed the maximum weight capacity of 160 kg (352 lbs). Always wear a life jacket and stay within protected shore zones (up to 300m).
Safety Warnings
- Weight Limit: Never exceed the maximum weight capacity of 160 kg.
- Inflation: Inflate only to the rated pressure (0.7 bar / 10 psi). Over-inflation can cause the boat to explode.
- Usage: Use only in protected shore zones. Be aware of offshore winds and currents.
- Safety Gear: Always wear a life jacket. Keep a bucket/bailer on board.
- Maintenance: Never transport the boat while inflated. Do not leave in direct sunlight for extended periods.
Setup Instructions
Compare the parts in your box to the parts listed in the manual. Use only Bestway approved inflation pumps. Never use high-pressure air to inflate the boat. Inflate the chambers until you see some folding at the welding seams, then check the pressure gauge. Ensure the valve is tightly closed before use.

Assembly Instructions
Follow the illustrations to install the fins and assemble the paddles. After the craft is inflated, connect the belts of the seats and footrests to the side buckles on the craft. The location of the seats and footrests can be adjusted along with the craft floor.

Repair Patch Instructions
For small punctures, repair according to the instructions provided with the repair patch. If the hole is too large for the provided patch, purchase a Bestway repair kit or take the boat to a specialty shop.
Disassembly Instructions
To deflate, open the air valves by pushing the control stem in and rotating until the valves stay open. Deflate all hull chambers at the same time to allow air pressure to drop evenly.

Maintenance & Storage
Remove paddles and seats. Remove all residual air before storage. Clean the boat with mild soap and clean water; do not use acetone, acid, or alkaline solutions. Dry all surfaces with a cloth. Store in a dry place with a temperature higher than 15°C (59°F), out of reach of children.
Manufacturer information
Bestway
Practical help
Common problems
Use the spanner to tighten the air valve.
Repair according to the instructions on the repair patch.
Purchase a Bestway repair kit or send the boat to a specialty shop.
Before use
- Inspect all boat components (air chambers, grab ropes, oars, air valves).
- Ensure life jackets and buoys are available.
- Verify the inflation pressure is 0.7 bar (10 psi).
- Ensure the valve is tightly closed.
- Check that passenger weight is within the 160 kg limit.
Specs in practice
- Inflated Size
- 3.65 m x 73 cm x 30 cm (12' x 29" x 12")
- Recommended Working Pressure
- 0.7 bar (10 psi)
- Maximum Weight Capacity
- 160 kg (352 lbs)
- Maximum Number of People
- 1 adult
Images and diagrams
- Inflation: Insert pump, inflate to 0.7 bar/10 psi.
- Deflation: Push control stem in and rotate to lock open.
- Fin installation: Slide fin into base.
Model compatibility
- Only use Bestway approved inflation pumps.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.