Music / Guitar Amplifiers
User Manual for Blackstar Debut Vertical 2x12 Extension Cabinet
Quick guide for the Blackstar Debut Vertical 2x12 Extension Cabinet. Includes technical specifications, safety warnings, and connection guidelines.
Quick answers from the manual
Quick answer
- The Blackstar Debut Vertical 2x12 is a 100W extension cabinet with selectable 4 or 16 Ohm impedance. p. 1
Key actions
- Connect the cabinet to your amplifier using the recommended cable before switching the amplifier on. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power Rating | 100 Watts | RMS power handling | p. 1 |
| Impedance | 4 or 16 Ohms | Selectable by input jack | p. 1 |
Show 1 more answers Show less
Where to find it in the PDF
- Safety and Specifications p. 1, 2
Table of contents
Quick guide from the manual
The Blackstar Debut Vertical 2x12 Extension Cabinet is a passive speaker cabinet designed for use with guitar amplifiers. This document provides essential safety information and technical specifications required for proper operation.
Safety Information
Read all instructions carefully before use.
- Ventilation: Do not block or cover ventilation slots or openings.
- Environment: Do not expose the unit to rain, liquids, or moisture. Avoid placing the unit near heat sources like radiators or stoves.
- Stability: Place the cabinet on a stable surface to prevent it from falling and causing damage or injury.
- Hearing Protection: High loudspeaker levels can cause permanent hearing damage. Avoid direct vicinity to loudspeakers operating at high levels and wear hearing protection if exposed continuously.
- Condensation: If the unit is moved from a cold environment to a warmer location, allow it to reach room temperature before switching on.
Technical Specifications
- Power Rating (RMS): 100 Watts
- Impedance: Mono - 4 or 16 Ohms (Selectable by input jack)
- Speakers: 2 x 12" Anthem 50 8 Ohm
- Weight: 15.6 kg
- Dimensions: 717 x 501 x 293 mm
Connection and Usage
Before switching on your amplifier, ensure the loudspeaker is connected as described in your amplifier's handbook using the recommended cable. Always ensure the amplifier is switched off before making or breaking connections to the cabinet.
Disposal
All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or local authorities.
Manufacturer information
Blackstar Amplification
Practical help
Common problems
Risk of permanent hearing loss
Avoid direct vicinity to loudspeakers operating at high levels and wear hearing protection if continuously exposed.
Condensation inside the unit
If moved from a cold to a warm environment, allow the unit to reach room temperature before switching on.
Before use
- Ensure the cabinet is placed on a stable surface.
- Check that the amplifier is switched off before connecting.
- Use the recommended cable for connection.
- Ensure ventilation slots are not blocked.
Show more Show less
Specs in practice
- Power Rating (RMS)
- 100 Watts - The continuous power handling capacity of the cabinet.
Model compatibility
- Compatible with amplifiers supporting 4 or 16 Ohm loads.
Manual page author
Emily Carter
User documentation editor