User Manual for Bosch 14.4V Battery

Quick Guide

This manual provides essential instructions for the Bosch 14.4V battery. Key takeaways include using only original Bosch chargers, maintaining an operating temperature of 0-45°C, and storing the battery in a cool, dry place (10-25°C) with a 40-60% charge if not in use for an extended period. Always inspect contacts for dirt or corrosion before charging.

Product Overview

The Bosch 14.4V battery is compatible with various Bosch 14.4V power tools. It features Electronic Cell Protection (ECP) to prevent deep discharge, overcharging, and overheating. Some models include CoolPack technology for improved heat dissipation.

Technical Specifications

• Nominal Voltage: 14.4V
• Battery Chemistry: Ni-CD, Ni-MH, or Li-ion
• Nominal Capacity: Varies by model (1300mAh to 4000mAh)
• Cycle Life: ≥300 cycles (up to 500 with premium cells)
• Charging Time: Approximately 1.2 hours

Installation & Removal

Installation: Align the battery with the tool's battery slot and slide it in firmly until you hear a click, ensuring it is fully engaged.

Removal: Press the unlock button on the side of the battery and pull it forward smoothly. Do not pull or pry forcefully to avoid damaging the locking mechanism.

Charging Instructions

Pre-Charging Preparation:

• Use only original Bosch chargers to prevent fire or battery swelling.
• Allow the battery to cool to room temperature (0-45°C) if it is hot after use.
• Inspect contacts for dirt, oil, or corrosion; clean with a dry cloth if necessary.

Charging Steps:

1. Plug the charger into a properly grounded power outlet.
2. Insert the battery into the charger slot, ensuring full contact.
3. Charging begins when the indicator light illuminates.
4. Remove the battery promptly once the full-charge indicator light turns on.
5. Unplug the charger after removing the battery.

Safety Warnings

• Environment: Do not charge in damp or wet environments. Protect from rain or snow.
• Handling: Do not disassemble, short-circuit, or incinerate the battery.
• Leakage: If leakage occurs, avoid contact with skin and eyes. Rinse immediately with soap and water and seek medical attention.
• Damage: Stop using the battery immediately if the case is cracked, or if smoke or unusual odors are detected.

Maintenance & Storage

Daily Maintenance: Clean battery contacts regularly with a dry cloth. Avoid dropping or impacting the battery. For Ni-CD/Ni-MH batteries, perform a full charge-discharge cycle every 3 months.

Long-Term Storage: Store in a cool, dry place (10-25°C, humidity ≤60%). Avoid direct sunlight and heat sources. Charge the battery to 40-60% capacity every 6 months to prevent deep discharge.

Compatibility & Warranty

This battery is compatible with various Bosch 14.4V power tools, including drills, drivers, grinders, and strapping tools (e.g., GSR 14.4V-LI, GWS 14.4V Professional). The warranty period is 1 year from the date of purchase, covering manufacturing defects only.