Home Appliances / Dishwashers
Bosch 24-BOS-1844 Dishwasher Quick Start Guide
Quick start guide for the Bosch 24-BOS-1844 dishwasher. Learn how to load dishes, use the Rackmatic system, clean the filter, and optimize wash performance.
Quick answers from the manual
Quick answer
- This guide provides quick tips for operating and maintaining your Bosch 24-BOS-1844 dishwasher, including loading instructions, filter maintenance, and optimal settings. p. 1
Key actions
- Clean the filter every 2 months. p. 1
- Set water heater to 49°C-52°C. p. 1
First start
- Press On/Off, select cycle/option, then press Start. p. 1
Show 3 more answers Show less
Problems and fixes
Soap not activating
Check water heater temperature (49-52°C).
p. 1Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Water Heater Temperature | 49°C - 52°C | Optimal range for soap activation | p. 1 |
Where to find it in the PDF
- Quick Tips p. 1
Table of contents
Quick Tips for Your Bosch Dishwasher
This guide provides essential tips to help you get the best performance from your Bosch 24-BOS-1844 dishwasher.
Loading and Rack Adjustment
- 3rd Rack: Use the 3rd rack for silverware, large utensils, or other hard-to-place items.
- Rackmatic System: The middle rack can be adjusted to 9 different positions. Pull out the middle rack, press the side levers, and adjust each side up or down to your desired height.
- Loading Dishes: Face dishes inward. Use angled tines to assist with loading and fold-down flip tines to accommodate bulkier items like large pots.
Operation and Performance
- Starting: Press the On/Off button, select your desired cycle and option, then press Start. Ensure nothing is blocking the spray arms before starting.
- Water Temperature: Set your water heater to 49°C to 52°C (120°F to 125°F). Temperatures outside this range may prevent soap from activating properly.
- Drying: Bosch dishwashers feature options like AutoAir, CrystalDry, or PureDry. Condensation on tub walls is normal with PureDry as it whisks moisture away.
- Detergent: For best results, Bosch recommends using Finish detergent tabs and Jet-Dry Rinse Aid.
Maintenance
- Filter Cleaning: Clean the dishwasher filter every 2 months with normal use. Turn the knob, lift the filter out, and rinse it with warm water and dishwashing soap.
- Surface Cleaning: Clean surfaces with a damp cloth and mild soap. Do not use abrasives or bleach-based cleaners.
Support
For additional assistance, visit bosch-home.ca/en/service or refer to the full Owner Manual at bosch-home.ca/en/service/owner-manuals. You can also reach the Bosch Customer Support Team at 1-800-944-2904.
Official resources from the manual
Manufacturer information
Bosch
Practical help
Common problems
Soap not activating or performing properly
Ensure your water heater temperature is set between 49°C and 52°C (120°F to 125°F).
Before use
- Scrape food off dishes (no need to pre-rinse)
- Ensure nothing is blocking the spray arms
- Use Finish detergent tabs and Jet-Dry Rinse Aid for best results
Show more Show less
Specs in practice
- Water Heater Temperature
- 49°C to 52°C (120°F to 125°F) is required for optimal soap activation.
- Filter Maintenance
- Clean every 2 months with normal use.
Images and diagrams
- The 3rd rack is designed for silverware and large utensils.
- The Rackmatic system allows for 9 height positions for the middle rack.
- The filter is removed by turning the knob and lifting it out.
Model compatibility
- Compatible with Finish detergent tabs and Jet-Dry Rinse Aid.
Manual page author
David Miller
Documentation analyst