Tools / Saws
Bosch GKS 18V-57-2 Professional Cordless Circular Saw User Manual
Quick guide for the Bosch GKS 18V-57-2 Professional cordless circular saw, covering safety, assembly, operation, and maintenance.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This manual provides essential information for the safe and efficient operation of the Bosch GKS 18V-57-2 Professional cordless circular saw. Always read the full safety instructions before use.
Device Description
The GKS 18V-57-2 is a cordless circular saw designed for straight and mitre cuts in wood. Key components include the on/off switch, lock-off button, spindle lock, parallel guide, and adjustable base plate.
Assembly
Before any work on the tool (maintenance, tool change, etc.), remove the battery. Wear protective gloves when changing the saw blade. Ensure the saw blade's maximum permitted speed is higher than the tool's no-load speed. Follow the steps in Figure A to mount or change the blade, ensuring the rotation direction matches the arrow on the blade guard.
Operation
Adjust the cutting depth using the clamping lever (7) so that less than a full tooth is visible under the workpiece. Adjust the mitre angle using the clamping lever (9). The cut mark (12) indicates the blade position for right-angled cuts. Always ensure the tool is switched off before inserting the battery.
Maintenance and Cleaning
Keep the tool and ventilation slots clean. The pendulum blade guard must move freely and close automatically. Clean the area around the guard regularly with a brush. Non-coated blades can be protected with a thin layer of acid-free oil, which must be removed before use.
Safety
Always wear personal protective equipment, including eye protection and a dust mask. Do not operate the saw in explosive atmospheres. Keep hands away from the cutting area and the blade. Support large panels to minimize the risk of blade pinching and kickback.
Manufacturer information
Bosch
Practical help
Common problems
Saw blade binds or kicks back
Release the trigger and hold the saw motionless in the material until the blade stops. Investigate and eliminate the cause of binding.
Battery charge indicator does not light up
The battery may be defective and must be replaced.
Before use
- Ensure the lower guard closes properly.
- Check that the saw blade is sharp and undamaged.
- Verify that the cutting depth and bevel angle levers are securely tightened.
- Ensure the battery is fully charged.
- Check that the workpiece is securely fastened.
Specs in practice
- No-load speed
- 5000 min-1
- Max. cutting depth (0°)
- 57 mm
- Max. cutting depth (45°)
- 41 mm
- Saw blade diameter
- 165 mm
Images and diagrams
- Figure A: Blade replacement procedure.
- Figure B: Chip ejector connection.
- Figure C: Cutting depth adjustment.
- Figure D: Using the parallel guide.
- Figure E: Using an auxiliary guide.
Model compatibility
- Compatible with GBA 18V and ProCORE18V batteries (≥ 4.0 Ah).
- Compatible with GAL 18..., GAX 18..., and GAL 36... chargers.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.