Tools / Drills
BOSCH GSB 1080-2-LI Professional Cordless Drill/Driver User Manual
User manual for the Bosch GSB 1080-2-LI Professional cordless drill/driver, covering safety instructions, operation, maintenance, and technical specifications.
Table of contents
Product Description
The Bosch GSB 1080-2-LI Professional is a versatile cordless drill/driver designed for driving and loosening screws, as well as drilling in wood, metal, ceramic, and plastic. It also features an impact drilling mode for working in brick, masonry, and stone.
Safety Instructions
General Power Tool Safety Warnings: Read all safety warnings and instructions. Failure to follow them may result in electric shock, fire, or serious injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres. Keep children and bystanders away while operating the tool.
Electrical Safety: Ensure the power tool plug matches the outlet. Avoid body contact with earthed or grounded surfaces. Keep power tools away from rain or wet conditions.
Personal Safety: Stay alert, watch what you are doing, and use common sense. Use personal protective equipment, including eye protection. Prevent unintentional starting by ensuring the switch is in the off-position before connecting to a power source or battery pack.
Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs. Under abusive conditions, liquid may be ejected from the battery; avoid contact.
Operation
The battery is supplied partially charged. For full capacity, charge it completely in the charger before first use. Apply the tool to the screw only when it is switched off. Adjust the gear switch only when the machine is at a complete stop. If the gear switch cannot be pushed to the stop, turn the drill chuck slightly.
Maintenance and Cleaning
For safe and proper working, always keep the machine and ventilation slots clean. Always remove the battery before performing any work on the machine.
Disposal
Power tools, batteries, accessories, and packaging should be sorted for environmentally friendly recycling. Do not dispose of power tools and batteries in household waste.
Manufacturer information
Bosch
Practical help
Common problems
Gear switch cannot be pushed to the stop
Turn the drill chuck slightly.
Tool insert jams
Switch off the power tool immediately. Be prepared for high reaction torque that can cause kickback.
Before use
- Ensure the battery is fully charged.
- Read the battery charger operating instructions.
- Ensure the tool is switched off before applying to a screw.
- Check that the gear switch is set correctly.
- Ensure the work area is clean and well-lit.
- Wear appropriate personal protective equipment.
Model compatibility
- Use only batteries and chargers recommended by Bosch.
- The battery is protected against dangerous overload when used with a Bosch power tool.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.