User Manual for Bright Starts 13069-MEES Playful Paradise Portable Swing
Quick guide for the Bright Starts 13069-MEES Playful Paradise Portable Swing. Includes assembly instructions, safety warnings, battery installation, and operation settings.
Table of contents
Manual images
Click an image to enlargeImportant Safety Information
WARNING: Failure to follow these instructions can result in serious injury or death.
- Fall and Strangulation Hazard: Always use the restraint system and adjust it to fit snugly. Stop using the product when the infant attempts to climb out (approximately 9 months).
- Weight Limits: Do not use if the child weighs less than 3 kg (6 lbs) or more than 9 kg (20 lbs).
- Suffocation Hazard: Never use on soft surfaces like beds, sofas, or cushions. Always place the product on the floor.
- Sleep Safety: This product is not for sleep. If the baby falls asleep, move them to a firm, flat sleep surface like a crib or bassinet.
- Recline: Keep the seat fully reclined until the infant is at least 4 months old and can hold their head up without help.
- Supervision: Never leave the child unattended.
Assembly Instructions



- Frame Assembly: Unfold the left and right swing frame assemblies until they lock into position.
- Foot Assembly: Attach the front and rear foot assemblies to the frame legs. Ensure all parts click securely into place.
- Seat Attachment: Attach the seat pad to the frame. Ensure the backrest tube and footrest tube are correctly inserted into the frame connectors.
- Toy Bar: Snap the toy bar with toys onto the frame.
Battery Installation
The swing control module requires (4) size C/LR14 (1.5V) alkaline batteries (not included).
- Use a screwdriver to open the battery compartment on the control module.
- Insert the batteries, ensuring the polarity matches the markings inside the compartment.
- Replace the cover and secure it with the screw.
- Replace all batteries at once; do not mix old and new, or different types of batteries.
Using the Swing Control Module
The control module allows you to adjust speed, timer, and volume.
- Power: Press the power switch to turn the swing on.
- Speed Control: Press the speed selector button to choose from 5 speed settings. The LED will flash to indicate the setting. Gently push the seat to start the motion.
- Timer: Press the timer button to select 30, 45, or 60 minutes. If no setting is chosen, the default is 90 minutes.
- Volume: Use the volume control switch to adjust or turn off music.
Using the Seat Restraint
Always secure the child using the restraint system.
- Place the child in the seat.
- Fasten the buckles on the seat restraint.
- Adjust the straps to ensure a snug fit around the child.
Using the Recline Function
The seat can be adjusted for comfort.
- Locate the recline adjustment mechanism on the side of the seat.
- Press the button to release the lock and adjust the seat to the desired angle.
- Ensure the seat is fully reclined for infants under 4 months old.
Care and Cleaning
- Seat Pad: Remove from the frame. Fasten all buckles and hook-and-loop patches. Machine wash with cold water on a gentle cycle. Do not bleach. Tumble dry on low heat.
- Toy Bar and Toys: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
- Frame: Wipe the metal frame with a soft, clean cloth and mild soap.
Storage and Travel
When storing the swing, remove the batteries to prevent leakage. Store in a dry location away from heat sources and direct sunlight.
Manufacturer information
Bright Starts
Practical help
Common problems
Replace all 4 batteries with new alkaline C/LR14 batteries. Weak batteries cause distorted sound, dimming lights, or slow motor operation.
Ensure the seat is fully reclined. Keep it in the most reclined position until the infant is at least 4 months old and can hold their head up.
Before use
- Check for damaged, missing, or loose parts.
- Ensure child weighs between 3kg and 9kg.
- Install 4x C/LR14 (1.5V) alkaline batteries.
- Ensure the swing is placed on a flat, firm floor.
- Verify the restraint system is adjusted snugly.
Specs in practice
- Weight Limit
- 3kg to 9kg.
Images and diagrams
- Assembly steps 1-5 show the frame construction and seat attachment.
- Control module diagram illustrates speed, timer, and volume buttons.
Model compatibility
- Not for use on elevated surfaces like tables.
- Not for sleep; if baby falls asleep, move to a firm, flat surface like a crib.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.