User Manual for Bright Starts 16906-MEES Portable Swing
Comprehensive user guide for the Bright Starts 16906-MEES Portable Swing. Includes assembly instructions, battery installation, safety warnings, recline adjustments, and control module operation.
Quick answers from the manual
Quick answer
- The Bright Starts 16906-MEES is a portable baby swing. It requires 4x C/LR14 batteries and is suitable for infants weighing between 3kg and 9kg. p. 1, 3, 24
Key actions
- Assemble the frame and seat p. 16, 17, 18
- Install batteries p. 19
- Operate the swing p. 24
First start
- Install 4x C/LR14 batteries in the control module. p. 19
Problems and fixes
Replace batteries; weak batteries cause distorted sound, dimming lights, and slow motor performance.
p. 3Maintenance and reset
- Clean seat pad in machine with cold water, gentle cycle. p. 3
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Batteries | 4x C/LR14 (1.5V) | Alkaline batteries required | p. 3 |
| Weight Capacity | 3kg - 9kg | Safe operating weight range | p. 2 |
Where to find it in the PDF
- Safety Warnings p. 2
- Assembly p. 16, 17, 18
- Control Module p. 24
Table of contents
Manual images
Click an image to enlargeImportant Safety Information
Read all instructions before assembly and use. Failure to follow these warnings can result in serious injury or death.
- Fall and Strangulation Hazard: Always use the restraint system and adjust it to fit snugly. Stop using the product when the infant attempts to climb out (approximately 9 months).
- Weight Limits: Do not use if the child weighs less than 3kg (6 lbs) or more than 9kg (20 lbs).
- Suffocation Hazard: Never use on soft surfaces like beds, sofas, or cushions. Always place the product on the floor. Never use on elevated surfaces.
- Sleep Safety: This product is not a substitute for a cot or crib. If the baby falls asleep, move them to a firm, flat sleep surface immediately.
- Supervision: Never leave the child unattended.
Assembly Instructions
Adult assembly is required. Ensure all parts are present before beginning.


- Connect the left and right swing frame assemblies.
- Attach the front and rear foot assemblies to the frame.
- Attach the seat pad and backrest tube to the frame.
- Secure the toy bar with toys to the top of the frame.
Battery Installation
The swing control module requires (4) size C/LR14 (1.5V) alkaline batteries (not included).

- Use a screwdriver to open the battery compartment on the control module.
- Insert batteries matching the polarity markings inside the compartment.
- Replace the cover and secure with the screw.
- Replace all batteries at once; do not mix old and new or different types.
- Remove batteries if storing the product for a long period.
Using the Swing Control Module
The control module allows you to adjust speed, timer, and music volume.

- Power: Press the Power Switch to turn the swing on.
- Speed Selector: Provides 6 speed settings. Press the button until the flashing LED displays the desired setting. Gently push the seat to start the motion.
- Swing Timer: Select 30, 45, or 60 minutes. If no setting is chosen, the default is 90 minutes.
- Volume Control: Adjust or turn off music volume as needed.
Adjusting the Seat
Always keep the seat fully reclined until the infant is at least 4 months old and can hold their head up without help. Use the recline function to adjust the seat angle as the child grows.
Care and Cleaning
- Seat Pad: Remove from frame. Fasten buckles and hook-and-loop patches. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, low heat.
- Toy Bar and Toys: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
- Frame: Wipe with a soft, clean cloth and mild soap.
Manufacturer information
Bright Starts
Practical help
Common problems
Replace all 4 batteries with fresh C/LR14 alkaline batteries. Weak batteries cause distorted sound, dimming lights, and slow motor performance.
Use the recline function to keep the seat fully reclined until the infant is at least 4 months old and can hold their head up.
The swing has a default 90-minute auto-shutoff if no timer is selected. Press the speed selector to restart.
Before use
- Check for damaged, missing, or loose parts.
- Ensure batteries are installed correctly (4x C/LR14).
- Verify child weight is between 3kg and 9kg.
- Ensure the swing is placed on a flat, firm floor.
- Adjust restraint system to fit snugly.
Specs in practice
- Battery Type
- Requires 4x C/LR14 (1.5V) alkaline batteries.
- Weight Limit
- 3kg to 9kg (6-20 lbs).
Images and diagrams
- Assembly steps show frame connection and seat attachment.
- Control module diagram identifies speed, timer, and volume buttons.
Model compatibility
- Not a substitute for a cot or crib.
- Do not use on elevated surfaces like tables.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.