User Manual for Bright Starts Wild Vibes Infant to Toddler Rocker 13031-MEES

Important Safety Information

WARNING: Failure to follow these warnings can result in serious injury or death.

• Fall Hazard: Never leave the child unattended. Always use the restraint system and adjust it to fit snugly. Never move or lift the product with the baby inside. Never lift the product using the toy bar as a handle.
• Weight Limit: Never place a child over 40 lb (18 kg) in the product.
• Usage Restrictions: The reclined position is only for children who cannot sit upright unassisted (up to 20 lb / 9 kg). The upright position is only for children who have developed enough upper body control to sit up without tipping forward.
• Surface Safety: Never use on an elevated surface (e.g., a table). Always use on the floor.
• Suffocation Hazard: Never use on a bed, sofa, cushion, or other soft surface. This product is not safe for sleep or unsupervised use. If the baby falls asleep, remove them immediately and place them on a firm, flat sleep surface such as a crib or bassinet.
• Environment: Keep away from windows where cords from blinds or curtains could cause strangulation. Keep away from open fires and strong heat sources.

Assembly Instructions

Ensure all parts are present before assembly. The product requires adult assembly.

1. Frame Assembly: Connect the seat frame sides (1 and 2) to the rear cross bar (3). Ensure they click into place.
2. Kickstand: Attach the kickstand (4) to the frame assembly.
3. Backrest: Insert the backrest tube (5) into the frame assembly until it clicks.
4. Vibration Unit: Install the vibration unit (6) onto the frame using the provided screws (A and B).
5. Seat Pad: Attach the seat pad (7) to the frame, securing all buckles and hook-and-loop patches.
6. Toy Bar: Attach the toy bar (8) to the frame.

Battery Installation

The vibration unit requires (1) size C/LR14 (1.5V) alkaline battery (not included).

• Use a screwdriver to open the battery compartment on the vibration unit.
• Insert the battery, ensuring the polarity matches the markings inside the compartment.
• Secure the battery cover with the screw.
• Note: Weak batteries cause erratic operation, including distorted sound, dimming lights, or slow/non-working motorized parts. Replace batteries if any function fails.

Using the Rocker

• Seat Restraint: Always use the restraint system. Adjust the straps to fit snugly around the child.
• Recline Function: Use the recline adjustment mechanism to change the seat angle. Ensure it is locked in the desired position.
• Vibration: Press the on/off button on the vibration unit to activate or deactivate the vibration feature.

Care and Cleaning

• Seat Pad: Remove from the frame. Fasten all buckles and hook-and-loop patches before washing. Machine wash with cold water, gentle cycle. Do not bleach. Tumble dry using low heat.
• Toy Bar and Toys: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame: Wipe the metal frame with a soft, clean cloth and mild soap.