Bright Starts Rainforest Vibes Vibrating Bouncer User Manual

Quick Start and Safety Information

The Bright Starts Rainforest Vibes Vibrating Bouncer is designed to soothe infants. Important Safety Warnings:

• Fall Hazard: Never leave the child unattended. Use the bouncer ONLY on the floor. Never use on elevated surfaces.
• Suffocation Hazard: Never use on soft surfaces like beds, sofas, or cushions. This product is not for sleep. If the baby falls asleep, move them to a firm, flat sleep surface like a crib.
• Usage Limits: Stop using the bouncer when the baby starts trying to sit up or reaches 9 kg (20 lb), whichever comes first.
• Transportation: Never lift or carry the baby in the bouncer. Never use the toy bar as a handle.

Assembly Instructions

Adult assembly is required. Ensure all parts are present before beginning.

1. Frame Assembly: Connect the base frame tubes (1, 2, 3) as shown in the assembly diagrams. Ensure the locking buttons click into place.
2. Backrest Assembly: Attach the backrest tubes (4, 5) to the base frame.
3. Footrest: Connect the footrest wire (6) to the base frame hubs.
4. Seat Pad: Slide the seat pad (8) onto the frame. Secure the buckles on the seat restraint and seat pad. Fasten all hook-and-loop patches.
5. Toy Bar: Attach the toy bar (9) to the frame hubs. Ensure it is securely locked.

Battery Installation

The vibration unit requires (1) size C/LR14 (1.5V) alkaline battery (not included).

• Use a Phillips screwdriver to open the battery compartment on the vibration unit.
• Insert the battery, ensuring the polarity matches the markings inside the compartment.
• Secure the battery cover with the screw.
• Replace batteries if the vibration becomes weak, sound distorts, or lights dim.

Using the Vibration Function

The vibration unit helps calm and soothe the baby.

• Locate the vibration switch on the unit.
• Slide the switch to the ON position to activate vibration.
• Slide the switch to the OFF position to deactivate.

Using the Seat Restraint

Always use the restraint system to keep the baby secure.

• Place the baby in the bouncer.
• Fasten the buckles on the seat restraint.
• Adjust the straps so they fit the baby snugly.

Care and Cleaning

• Seat Pad: Remove from the frame. Fasten all buckles and hook-and-loop patches. Machine wash in cold water on a gentle cycle. Do not bleach. Tumble dry on low heat.
• Toy Bar and Toys: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame: Wipe the metal frame with a soft, clean cloth and mild soap.

Storage and Disassembly

To disassemble for storage, use a small Phillips screwdriver to depress the release buttons on the inside of each connecting hub. Remove the footrest and base frame tubes from the hubs.