Home Appliances / Steam Cleaners
User Manual for Cecotec Rock'nCut Shuriken Steel ProBlades Food Slicer
Quick guide for the Cecotec Rock'nCut Shuriken Steel ProBlades food slicer. Includes setup, operation, cleaning, and safety instructions for optimal use.
Quick answers from the manual
Quick answer
- The Rock'nCut Shuriken Steel ProBlades is a domestic food slicer. Use it for soft boneless meat, cheese, bread, and vegetables. Do not exceed 5 minutes of continuous operation. p. 33, 35, 37, 39
Key actions
- Cleaning the blade p. 34, 36, 40, 42
- Adjusting thickness p. 31, 33, 35, 37
First start
- Wash all food-contact components with warm, soapy water before first use. p. 31, 33, 35, 37
Show 3 more answers Show less
Problems and fixes
Blade rotates slowly
Food may be too frozen; allow it to thaw.
p. 31, 33, 35, 37Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Max food size | 110 x 100 x 90 mm | Maximum dimensions for slicing | p. 31, 33, 35, 37 |
Where to find it in the PDF
- Parts and Components p. 31, 33, 35, 37
- Operation p. 31, 33, 35, 37
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Cecotec Rock'nCut Shuriken Steel ProBlades is a domestic food slicer designed for slicing soft boneless meat, cheese, bread, and vegetables. Important: Do not use the slicer for more than 5 minutes of continuous operation. If the motor overheats, allow it to cool for at least 30 minutes before using it again. Do not slice hard, frozen, or bone-in ingredients.
Parts and components
- Thickness guide
- Food pusher with safety guard
- Safety switch
- Operating switch
- Food cutting tray
- Main body base
- Blade
- Removable blade holder
- Adjustable thickness selector
- Adjustment bar
Before use
Unpack the device and ensure all parts are present and undamaged. Wash all components that come into contact with food (cutting disc, carriage, food pusher, and thumb guard) with hot, soapy water. Rinse and dry thoroughly with a soft cloth. Place the appliance on a flat, stable surface and unwind the cable.
Operation
- Connect the power cord to a mains socket.
- Place the food on the cutting tray and press the food pusher against the thickness guide.
- Turn the adjustable thickness dial to set the desired thickness (0 to 15 mm).
- Place a plate or bowl next to the slicer to collect slices.
- Switch on the appliance.
- Bring the safety switch towards you, then simultaneously press the operating switch to start the blade.
- Push the tray towards the blade and move it back and forth firmly while keeping the food pressed against the guide.
- When finished, turn the operating switch to the O position, switch off the machine, and unplug it.
Cleaning and maintenance
Warning: The blade is very sharp; handle with care. Do not wash any parts in the dishwasher.
- Disconnect the device from the mains.
- Ensure the device has stopped completely and set the thickness knob to the minimum.
- Pull the food pusher backwards.
- Turn the blade holder clockwise to unlock and remove the blade.
- Soak the blade in warm, soapy water for several minutes, then rinse and dry.
- Clean the housing with a damp cloth.
- Dry all parts thoroughly before storage.
Safety
This appliance is for domestic use only. Keep out of reach of children. Do not use near hot surfaces or outdoors. Always ensure the mains voltage matches the rating label. Do not use external timers or remote control systems. If the power cord is damaged, it must be replaced by authorized technical support.
Manufacturer information
Cecotec Innovaciones S.L.
Practical help
Common problems
Blade rotates slowly
The food may be too frozen. Allow it to thaw before continuing.
Motor overheating
Do not use for more than 5 minutes continuously. Let the slicer rest for 30 minutes.
Before use
- Unpack and check all components
- Wash food-contact parts with warm soapy water
- Place on a flat, stable surface
- Unwind the power cable
- Install food pusher on the carriage
Show more Show less
Specs in practice
- Max food size
- 110 x 100 x 90 mm (length x width x thickness)
- Max continuous use
- 5 minutes
- Cooling time
- 30 minutes
- Cutting thickness
- 0 to 15 mm
Images and diagrams
- Fig 1: Identification of parts and components
- Fig 2: Thickness adjustment dial
Model compatibility
- Not suitable for commercial use
- Do not slice hard, frozen, or bone-in ingredients
- Do not slice fruit with hard pits
Manual page author
Emily Carter
User documentation editor