Home Appliances / Personal Care
User Manual for Cecotec CeramicCare 12in1 AirGlam
Quick guide for the Cecotec CeramicCare 12in1 AirGlam. Includes setup, operation, styling tips, cleaning instructions, and troubleshooting.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Cecotec CeramicCare 12in1 AirGlam is a versatile hair styling tool. Before use, ensure the mains voltage matches the rating label and that the plug is earthed. Always keep the device away from water, even when switched off, and consider installing an RCD in the bathroom circuit for added safety.
Parts and components
The device consists of the main body with a 360° rotating cable, air inlet filter cover, power button, air speed button, and temperature button. It comes with 12 different heads, including curling barrels, straightening brushes, round brushes, and a drying head.
Operation
To start: Wash and condition your hair, then towel dry and comb it. Align the desired head with the air outlet and turn it to lock it into place.
Settings: Press and hold the power button to turn the device on. Use the speed and temperature buttons to adjust settings. Both have three levels, indicated by LED lights. The device saves the last setting for future use.
Curling technique: With hair at least 85% dry, separate into 2 cm strands. Bring a strand close to the curling head; the Coanda effect will attract and curl the hair. Hold for a few seconds, then use a shot of cold air to set the style.
Automatic cleaning: With the device off, press and hold the temperature button for 5 seconds. The dryer will blow air out of the inlet grille for 20 seconds.
Cleaning and maintenance
Always unplug the device and let it cool before cleaning. Use a soft, damp cloth for the surface. Do not use abrasive cleaners or submerge in water.
Filter cleaning: Rotate the air-inlet filter cover to unlock and pull it down. Use a soft brush or cotton swab to clean the inlet and filter, then lock the cover back in place.
Troubleshooting
If the device does not work properly, check if it is correctly plugged in, if the attachment is fitted correctly, or if it has shut down due to overheating. If overheated, unplug and allow it to cool down completely before restarting. Ensure the air inlet is not obstructed.
Manufacturer information
Cecotec Innovaciones S.L.
Practical help
Common problems
Device does not work properly
Check power connection, ensure attachment is correctly fitted, and verify the device has not shut down due to overheating. If overheated, unplug and let it cool.
Air inlet blocked
Ensure nothing is obstructing the air inlet or outlet. Clean the filter if necessary.
Before use
- Unpack the device and remove all packaging materials.
- Check that all 12 heads and components are included and undamaged.
- Ensure the mains voltage matches the device rating label.
- Ensure the power plug is earthed.
- Keep the original packaging for future transport if desired.
Specs in practice
- Voltage and frequency
- 220-240 V~, 50/60 Hz
Images and diagrams
- Fig 1: Main body controls including power, speed, temperature, and filter cover.
- Fig 2: Overview of the 12 included styling attachments.
- Fig 3: Filter cleaning procedure: unlock, remove, clean, and lock.
Model compatibility
- Designed for domestic use only.
- Not intended for use in bars, restaurants, farmhouses, hotels, motels, or offices.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.