User Manual for Cecotec CeramicCare 14in1 AirGlam Hot Air Styler

Quick guide from the manual

The Cecotec CeramicCare 14in1 AirGlam is a versatile hot air styling tool designed for domestic use. It features multiple attachments for various styling needs, including curling, straightening, and drying. Always ensure the device is unplugged when not in use, especially in bathroom environments.

Parts and Components

The device consists of a main body with the following controls:

• Head: Main attachment point.
• Air speed-change button: Adjusts airflow intensity.
• Temperature-change button: Adjusts heat settings.
• Power button: Turns the device on and off.
• Air-inlet filter cover: Removable for cleaning.
• 360° rotating cable: Prevents tangling.

The set includes 14 different heads, such as curling barrels, straightening brushes, round brushes, a drying head, and a diffuser.

Operation

Setup: Align the desired head with the air outlet and turn it to lock it onto the main body.

Power and Settings: Press and hold the power button to switch the device on. The device defaults to speed and temperature setting 1. It will save your last settings for future use.

• Air Speed: Press the speed button repeatedly to cycle through 3 levels. LED indicators show the current level.
• Air Temperature: Press the temperature button repeatedly to cycle through 3 heat levels. Pressing again activates the cold air function.

Automatic Cleaning: With the device switched off, press and hold the temperature button for 5 seconds. The dryer will blow air out of the air inlet grille for 20 seconds to clear dust.

Styling with Curlers

1. Ensure hair is at least 85% dry.
2. Separate hair into 2 cm strands.
3. Select a warm or hot temperature.
4. Bring a strand close to the curling head; the Coanda effect will attract and wrap the hair.
5. Hold for a few seconds, then release a shot of cold air to set the style.
6. Switch off and unwind the hair.

Cleaning and Maintenance

Always unplug the device and allow it to cool completely before cleaning. Use a soft, damp cloth to wipe the exterior. Do not immerse the device in water.

Filter Cleaning: Turn the air-inlet filter cover to unlock it and pull it downwards. Use a soft brush or cotton swab to clean the filter and air inlet. Refit the cover and lock it in place.

Troubleshooting

If the device does not work properly, check the following:

• Ensure it is correctly plugged into a power outlet.
• Verify that the attachment is fitted correctly.
• Check if the device has shut down due to overheating. If so, unplug it, allow it to cool down, and ensure the air inlet is not obstructed before restarting.