User Manual for Conair 124AK and 124ANP Hair Dryer
Quick guide for the Conair 124AK and 124ANP compact hair dryer. Learn how to use the dual voltage settings, test the ALCI safety plug, and maintain your device for optimal performance.
Table of contents
Quick guide from the manual
This hair dryer is equipped with a dual voltage feature for worldwide travel and an ALCI safety plug to prevent electric shock. Always test the ALCI safety feature before every use. Ensure the voltage selector is set correctly for your destination (125V or 250V) before plugging the device into an outlet.
Safety Instructions
Danger: Keep away from water. Any hair dryer is electrically live even when the switch is off. To reduce the risk of death or injury by electric shock:
- Always unplug immediately after use.
- Do not use while bathing.
- Do not place or store where it can fall into a tub or sink.
- If the appliance falls into water, unplug it immediately. Do not reach into the water.
Warning: Never leave the appliance unattended when plugged in. Do not use near children or individuals with certain disabilities. Keep the cord away from heated surfaces and do not wrap it around the dryer.
Getting to Know Your Dryer
The Conair 1600 Watt Compact Styler features:

- 1600 watts of drying power.
- 2 heat/speed settings for styling versatility.
- Folding handle for easy storage.
- Dual voltage for worldwide travel.
Operating Instructions
Dual Voltage Operation:
- For 110–125 Volt Operation: Ensure the dual voltage switch is set to 125. Use a small coin or paperclip to turn the switch if necessary.
- For 220–250 Volt Operation: Set the speed switch to Low and the heat switch to Hot. Turn the dual voltage switch to the 250 position. The dryer will operate at high speed with high heat. Do not change settings while operating. A plug adapter may be required in some countries.
ALCI Safety Feature
The ALCI (Appliance Leakage Circuit Interrupter) is a safety feature that renders the dryer inoperable under abnormal conditions, such as immersion in water.
To test the ALCI:
- Plug in the appliance and press the test button on the plug.
- The appliance should stop working, and the reset button should pop out.
- To reset, unplug the unit, push the reset button in, and reinsert the plug into the outlet.
If the ALCI is not functioning properly, return the hair dryer to an authorized Conair Service Center.
Styling Guide
- Drying Basics: Shampoo and condition hair, then towel dry. Direct hot air through a section of hair while moving the dryer steadily. Keep air intake vents unobstructed.
- Body & Volume: Turn head upside down while drying and position airflow toward the roots.
- Straightening: Use a large round brush to hold hair taut in sections while drying.
- Waves: Grasp hair at the roots and scrunch between fingertips while drying.
Maintenance and Storage
The dryer is virtually maintenance-free. No lubrication is needed. To clean, unplug the cord and remove dust and lint from air intake openings using a small brush or vacuum attachment. Wipe the outer surface with a cloth only.
Storage: When not in use, disconnect, allow to cool, and store in a safe, dry location out of reach of children. Do not wrap the cord tightly around the dryer; allow it to hang or lie loose at the point of entry into the dryer.
Manufacturer information
Conair LLC
Practical help
Common problems
The ALCI safety feature may have tripped. Unplug the unit, allow it to cool, press the reset button on the plug, and reinsert into the outlet.
Check if air intake vents are blocked by hair or lint. Clean the vents and allow the unit to cool for 10-15 minutes.
Ensure the voltage selector switch is set to the correct position (125 or 250) for your local power supply.
Before use
- Verify the voltage selector matches your local power supply (125V or 250V).
- Inspect the power cord for any damage or kinks.
- Ensure air intake vents are free of hair and lint.
- Perform the ALCI safety test by pressing the test button on the plug.
Specs in practice
- Dual Voltage
- Allows the dryer to be used in countries with 125V or 250V power systems.
Images and diagrams
- The dryer features a folding handle for compact storage.
- The ALCI plug contains both a 'Test' and 'Reset' button for safety verification.
- The dual voltage selector is located on the handle and requires a coin or tool to adjust.
Model compatibility
- A plug adapter may be necessary in certain countries when using the 250V setting.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.