User Manual for Cosori 10-Tray Stainless Steel Dehydrator CFD-P102-SUSR

Quick Guide

This dehydrator is designed for home use only. Before first use, ensure all packaging is removed and wash all trays and accessories with warm, soapy water. Run the dehydrator empty for 30 minutes at any temperature to remove manufacturing odors. Always use the device on a flat, stable, heat-resistant surface.

Getting to Know Your Dehydrator

The unit consists of the following main components:

• Door: Front access panel.
• Control Panel: Interface for setting time and temperature.
• Housing: Main body of the unit.
• Handles: For moving the unit.
• Power Cord: Connects to a 120V, 60Hz outlet.
• Trays: 10 stainless steel trays for food.
• Mesh Tray: Used for smaller items.
• Fruit Roll Sheet: Used for fruit rolls or liquids.

Operation

To begin dehydrating:

1. Plug the dehydrator into a grounded 120V outlet.
2. Place food on trays, ensuring they are not overloaded (max 3.3 lb / 1.5 kg of food).
3. Close the door.
4. Press START/STOP to wake the unit.
5. Use TEMP/TIME to select settings, then use the + or - buttons to adjust values.
6. Press START/STOP to begin the cycle.

Resetting: Press and hold START/STOP and the + button for 3 seconds until you hear a beep.

Keep Warm: Press KEEP WARM to hold the temperature at 95°F for 24 hours after the dehydration cycle finishes.

Care and Maintenance

Cleaning:

• Unplug the unit and allow it to cool completely before cleaning.
• Soak trays in warm, soapy water for easy food residue removal.
• Use a soft brush if necessary.
• Clean the housing with a damp cloth.
• Note: Do not use abrasive chemicals. Trays are dishwasher-safe, but the mesh tray and fruit roll sheet should be hand-washed.

Troubleshooting

If you encounter issues:

• Dehydrator won't turn on: Check the power connection and ensure the outlet is functional.
• E1, E2, or E3 on display: The unit is damaged or malfunctioning. Contact Customer Support.
• Uneven drying: Rearrange the trays to ensure even airflow and avoid overlapping food.

Specifications

• Model: CFD-P102-SUSR
• Power Supply: 120V, 60Hz
• Rated Power: 640W
• Temperature Range: 95°F–165°F (35°C–75°C)
• Time Range: 30 min–48 hr