Tools / Power Tools
User Manual for Einhell TE-MG 200 CE Multifunction Tool
Quick guide for the Einhell TE-MG 200 CE multifunction tool. Includes setup, tool mounting, operation, maintenance, and safety instructions.
Quick answers from the manual
Quick answer
- The Einhell TE-MG 200 CE is a multifunction tool designed for sanding, sawing, and scraping wood, iron, plastic, and similar materials. p. 16
Key actions
- Mounting tools p. 17
- Adjusting speed p. 18
First start
- Check that the data on the rating plate matches the mains data before connecting. p. 17
Problems and fixes
Excessive sparking
Have carbon brushes checked by a qualified electrician.
p. 19Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power input | 200 W | Power consumption | p. 17 |
Where to find it in the PDF
- Technical Data p. 17
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Einhell TE-MG 200 CE is a versatile multifunction tool designed for sanding, sawing, and scraping wood, iron, plastic, and similar materials. Always wear ear protection and a dust mask when operating the tool to prevent injury.
Device Description
The tool features an ON/OFF switch, a tool chuck for attaching various accessories, a speed controller to adjust performance, and a dust extraction system to keep your work area clean.
Assembly and Setup
Fitting the plug-in tools:
- Hold the tool so the ON/OFF switch points down and the tool chuck faces up.
- Place the desired tool (e.g., triangular sanding plate) onto the chuck so the pins fit into the recesses.
- Secure the tool using the supplied screw and tighten it firmly with the hexagon key.
- Ensure the washer is used correctly, especially with the saw blade and scraper.
Fitting the dust extraction device:
- Position the dust extraction device onto the tool chuck.
- Fasten it by latching it into the air vents.
- Connect the extractor adapter and attach your vacuum cleaner for optimal dust removal.
Operation
Switching on/off: Slide the switch forward to turn the tool on and backward to turn it off.
Speed control: Use the speed controller to select the desired speed. The plus direction increases speed, while the minus direction decreases it.
Working tips:
- Always work away from your body.
- Never place hands in the direct vicinity of the work area.
- Use only undamaged, high-quality plug-in tools.
- For sawing, watch out for foreign bodies in the material.
- For sanding, the performance depends on the choice of sanding paper and the pressure applied.
- For scraping, start with a flat angle and low pressure to avoid damaging the surface.
Maintenance and Cleaning
Always pull the power plug before cleaning. Keep air vents and the motor housing free of dust. Clean regularly with a moist cloth and soft soap. Do not use solvents. If excessive sparking occurs, have the carbon brushes checked by a qualified electrician.
Storage
Store the tool and accessories in a dark, dry, and frost-free place, ideally between 5 and 30 degrees Celsius. Keep in the original packaging.
Manufacturer information
Einhell
Practical help
Common problems
Excessive sparking
Have the carbon brushes checked by a qualified electrician.
Tool not secure
Ensure the screw (b) is tightened securely with the hexagon key (9).
Before use
- Check that the tool is in perfect working order.
- Ensure the correct tool is selected for the material.
- Wear ear protection and a dust mask.
- Check that the mains voltage matches the rating plate.
- Ensure the tool is securely mounted.
Specs in practice
- Idling speed
- 15000-21000 rpm
- Protection class
- II / Double insulation
Images and diagrams
- Figure 1: Overview of the tool and components.
- Figure 2/3: Mounting the plug-in tools.
- Figure 4/5: Mounting the dust extraction device.
- Figure 6: Speed controller.
Model compatibility
- Designed for sanding, sawing, and scraping wood, iron, plastic, and similar materials.
- Not designed for commercial, trade, or industrial applications.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.