Home Appliances / Refrigerators
Quick Start Guide for Esatto 198L Hybrid Chest Fridge/Freezer ECF198W2
Quick start guide for the Esatto 198L Hybrid Chest Fridge/Freezer (ECF198W2). Includes essential installation tips, first-time setup procedures, temperature control settings, and product specifications.
Quick answers from the manual
Quick answer
- This guide covers the initial setup, installation requirements, and temperature control settings for the Esatto ECF198W2 Hybrid Chest Fridge/Freezer. p. 1, 2
Key actions
- Wait 30 minutes after placement before connecting to power. p. 2
- Run the unit for 2-3 hours (4 hours in summer) before adding food. p. 2
First start
- Position on a level surface, wait 30 minutes, connect to power, and run for 2-3 hours before adding food. p. 2
Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Dimensions | 850H x 816W x 550D mm | Physical size of the unit | p. 2 |
| Energy Rating | Fridge: 5 Stars / Freezer: 3 Stars | Energy efficiency rating | p. 2 |
Where to find it in the PDF
- Installation and Setup p. 2
Table of contents
Quick Start Guide
This document provides essential information to help you set up and start using your Esatto 198L Hybrid Chest Fridge/Freezer (Model ECF198W2). For detailed installation instructions, please refer to pages 10–11 of the full user manual.
Installation Tips
Proper installation is critical for the performance and safety of your appliance:
- Two-person installation: Use two or more people to move and install the appliance to avoid injury.
- Freestanding design: This unit is designed for freestanding use only and should not be recessed or built-in.
- Placement: Position on a dry, sturdy, and level surface capable of supporting the unit when fully loaded. Place in a well-ventilated indoor area away from direct sunlight.
- Ambient temperature: Ensure the ambient temperature corresponds to the climate class (SN/N/ST/T) indicated on the rating plate.
- Clearances: Maintain adequate airflow around the cabinet. Allow at least 20cm of clear space at the back, 20cm at the sides, and 70cm between the top of the unit and any surface above.
First Use
Follow these steps before using your appliance for the first time:
- Keep the refrigerator still for at least 30 minutes before connecting it to the power supply.
- After connecting to power, allow the unit to run for 2–3 hours (or at least 4 hours in summer when ambient temperatures are high) before placing any fresh or frozen food inside.
Temperature Control
The temperature controls are located on the outside of the fridge. This unit can operate as either a fridge or a freezer.
- Fridge mode: Set the control dial to 'cooling'.
- Freezer mode: Set the control dial to a position between 'freezing' and 'super'.
Product Details
- Dimensions: 850H x 816W x 550D (mm)
- Energy Rating: Fridge: 5 Stars / Freezer: 3 Stars
- Warranty: 2 Years
Support
If you need assistance, contact the support team:
- Phone: 1300 11 4357
- Email: [email protected]
- Reviews: Share your experience at esatto.house/review
Official resources from the manual
Manufacturer information
Esatto
Practical help
Common problems
Appliance not cooling effectively
Ensure the unit has run for at least 2-3 hours (4 hours in summer) before adding food.
Installation safety
Always use two or more people to move the appliance to prevent back or other injuries.
Before use
- Keep the unit still for 30 minutes before connecting to power.
- Ensure the surface is dry, sturdy, and level.
- Verify the area is well-ventilated and away from direct sunlight.
- Run the unit empty for 2-3 hours (4 hours in summer) before adding food.
Show more Show less
Specs in practice
- Energy Rating
- Fridge: 5 Stars / Freezer: 3 Stars
Images and diagrams
- The control dial is located on the outside of the fridge.
- Clearance requirements: 20cm at the back, 20cm at the sides, and 70cm above the unit.
Model compatibility
- The unit is for freestanding use only; do not recess or build-in.
- Ambient temperature must match the climate class (SN/N/ST/T) on the rating plate.
Manual page author
David Miller
Documentation analyst