Home Appliances / Refrigerators
Esatto 236L Top Mount Refrigerator Quick Start Guide
Quick start guide for the Esatto 236L Top Mount Refrigerator (models ETM236S & ETM236W). Includes installation tips, first-time setup, temperature control, and technical specifications.
Quick answers from the manual
Quick answer
- This guide provides essential setup and installation instructions for the Esatto 236L Top Mount Refrigerator (models ETM236S & ETM236W). p. 1, 2
Key actions
- Wait 2 hours before connecting to power. p. 2
- Run for 2-3 hours before adding food. p. 2
First start
- Keep the refrigerator still for 2 hours before connecting to power. Run for 2-3 hours (4 hours in summer) before adding food. p. 2
Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Dimensions | 1522H x 545W x 610D mm | Physical size of the unit | p. 2 |
| Energy Rating | 3 Stars | Energy efficiency classification | p. 2 |
| Warranty | 2 Years | Manufacturer warranty period | p. 2 |
Where to find it in the PDF
- Cover Page p. 1
- Installation and Setup p. 2
Table of contents
Quick guide from the manual
This document provides essential setup and installation instructions for the Esatto 236L Top Mount Refrigerator (models ETM236S and ETM236W). It covers the initial installation requirements, first-time startup procedures, and basic temperature control.
Installation Tips
- Two-person installation: Use two or more people to move and install the appliance to prevent injury.
- Freestanding design: This appliance is designed to be freestanding only. Do not recess or build it into cabinetry.
- Floor surface: Position the refrigerator on a dry, sturdy, and level surface capable of supporting the unit when fully loaded.
- Ambient temperature: Ensure the ambient temperature corresponds to the climate class (T) indicated on the rating plate, typically between 16°C and 38°C.
- Clearances: Proper air circulation is required for the compressor and condenser. Allow at least 10cm of clear space at the back and sides, and 30cm of space above the unit. If installing next to a fixed wall, ensure there is sufficient space on the hinge side for the door to swing open.
First Use
Before connecting the refrigerator to the power supply, keep it in a still, upright position for 2 hours. After connecting, allow the refrigerator to run for 2–3 hours (or at least 4 hours in summer when ambient temperatures are high) before placing any fresh or frozen food inside.
Temperature Control
The temperature controls are located inside the refrigerator. To adjust the internal temperature, press the Setting button to cycle through the four available temperature levels.
Technical Specifications
- Dimensions: 1522H x 545W x 610D (mm)
- Energy Rating: 3 Stars
- Warranty: 2 Years
Support
If you require assistance, contact the support team:
Phone: 1300 11 4357Email: [email protected]
Manufacturer information
Esatto
Practical help
Before use
- Ensure the floor is dry, sturdy, and level.
- Allow 10cm clearance at the back and sides.
- Allow 30cm clearance above the unit.
- Keep the refrigerator still for 2 hours before connecting to power.
- Run the fridge for 2-3 hours (4 hours in summer) before adding food.
Specs in practice
- Energy Rating
- 3 Stars
Show more Show less
Model compatibility
- Freestanding design only; do not recess or build-in.
- Ambient temperature must be between 16°C and 38°C.
Manual page author
Michael Turner
Technical manual editor