Home Appliances / Refrigerators
Esatto 203L Top Mount Refrigerator
Quick start guide for the Esatto 203L Top Mount Refrigerator (models ETM203S and ETM203W). Includes essential installation tips, first-time setup procedures, temperature control settings, and technical specifications.
Quick answers from the manual
Quick answer
- The Esatto 203L Top Mount Refrigerator (ETM203S/ETM203W) requires a 2-hour rest period after moving before power connection, and 2-3 hours of operation (4 hours in summer) before adding food. It must be installed in a freestanding location with 10cm side/back clearance and 30cm top clearance. p. 2
Key actions
- Install the unit on a level surface with 10cm clearance at the back/sides and 30cm at the top. p. 2
First start
- Wait 2 hours after positioning before connecting to power. Run for 2-3 hours (4 hours in summer) before adding food. p. 2
Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Dimensions | 1372H x 545W x 610D mm | Physical size of the unit | p. 2 |
Where to find it in the PDF
- Quick Start Guide p. 1, 2
Table of contents
Quick Start Guide Overview
This document provides essential setup and operation instructions for the Esatto 203L Top Mount Refrigerator, specifically for models ETM203S and ETM203W. It covers installation requirements, initial startup procedures, and basic temperature adjustments.
Installation Tips
- Personnel: Use two or more people to move and install the appliance to prevent injury.
- Placement: This is a freestanding appliance and should not be recessed or built-in. Place it on a dry, sturdy, and level surface capable of supporting the unit when fully loaded.
- Environment: Ensure the ambient temperature corresponds to the climate class (T) indicated on the rating plate, specifically between 16°C and 38°C.
- Clearances: Proper airflow is required for the compressor and condenser. Maintain at least 10cm of clear space at the back and sides, and 30cm of space above the unit. If installing next to a fixed wall, ensure sufficient space on the hinge side for the door to swing open.
First Use
Follow these steps before using your refrigerator for the first time:
- Resting: Keep the refrigerator still for 2 hours before connecting it to the power supply.
- Cooling: Allow the fridge to run for 2–3 hours before placing any fresh or frozen food inside. In summer or high ambient temperatures, allow at least 4 hours of run time.
Temperature Control
The temperature controls are located inside the refrigerator. Press the Setting button to cycle through the four available temperature levels to select your desired setting.
Product Specifications
- Dimensions: 1372H x 545W x 610D (mm)
- Energy Rating: 3 Stars
- Warranty: 2 Years
Support
If you require assistance, contact the support team:
- Phone: 1300 11 4357
- Email: [email protected]
Manufacturer information
Esatto
Practical help
Common problems
Refrigerator not cooling properly after initial setup
Ensure the unit has run for at least 2-3 hours (4 hours in summer) before adding food.
Difficulty opening the door fully
If installed next to a fixed wall, ensure there is sufficient space on the hinge side for the door to swing open.
Before use
- Ensure two people are available to move the appliance.
- Verify the floor surface is dry, sturdy, and level.
- Check that the ambient temperature is between 16°C and 38°C.
- Maintain 10cm clearance at the back and sides.
- Maintain 30cm clearance above the unit.
- Wait 2 hours after positioning before connecting to power.
Show more Show less
Specs in practice
- Energy Rating
- 3 Stars
Images and diagrams
- The refrigerator features internal temperature controls located inside the main compartment.
Model compatibility
- This appliance is designed for freestanding use only and must not be recessed or built-in.
Manual page author
Michael Turner
Technical manual editor