Home Appliances / Refrigerators
Quick Start Guide for Esatto 196L Bar Fridge EBF196W
Quick start guide for the Esatto 196L Bar Fridge (EBF196W). Includes installation tips, temperature control settings, first-time startup procedures, and technical specifications.
Quick answers from the manual
Quick answer
- The Esatto 196L Bar Fridge (EBF196W) is a freestanding appliance. For first use, let it stand for 2 hours before plugging in, and run for 2-3 hours before adding food. Use the internal knob to adjust temperature (MAX for colder, MIN for warmer). p. 2
Key actions
- Install on a level surface with 10cm clearance at back/sides and 30cm above. p. 2
First start
- Keep still for 2 hours before connecting to power. Run for 2-3 hours (4+ in summer) before adding food. p. 2
Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Dimensions | 1232H x 550W x 575D mm | Physical size of the unit | p. 2 |
Where to find it in the PDF
- Installation and Usage p. 2
Table of contents
Quick guide from the manual
This document provides essential setup and operation instructions for the Esatto 196L Bar Fridge (Model EBF196W). It covers installation requirements, temperature adjustments, and initial startup procedures.
Installation Tips
- Placement: This is a freestanding appliance. Do not recess or build it into cabinetry.
- Surface: Place on a dry, sturdy, and level surface capable of supporting the weight when fully loaded.
- Clearances: Ensure proper airflow by maintaining at least 10cm of space at the back and sides, and 30cm of space above the unit. If installing next to a wall, leave enough space on the hinge side for the door to swing open.
- Ambient Temperature: Ensure the environment is within the climate class (T) range of 16°C – 38°C.
- Safety: Use two or more people to move and install the appliance to prevent injury.
Temperature Control
The temperature control knob is located inside the fridge.
- MAX: Turn the knob to MAX to lower the internal temperature.
- MIN: Turn the knob to MIN to increase the internal temperature.
- OFF: Turn the dial to OFF to stop the unit from operating.
First Time Startup
- Keep the refrigerator still for 2 hours before connecting it to the power supply.
- Allow the fridge to run for 2–3 hours (or 4+ hours in summer) before adding any fresh or frozen food.
Product Details
- Dimensions: 1232H x 550W x 575D mm
- Energy Rating: 4 Stars
- Warranty: 2 Years
Support
If you need assistance, contact the support team:
- Phone: 1300 11 4357
- Email: [email protected]
Manufacturer information
Esatto
Practical help
Common problems
Fridge not cooling enough
Turn the temperature control knob towards MAX.
Fridge too cold
Turn the temperature control knob towards MIN.
Before use
- Ensure the fridge is on a dry, sturdy, level surface.
- Allow at least 10cm clearance at the back and sides.
- Allow 30cm clearance above the unit.
- Keep the refrigerator still for 2 hours before connecting to power.
- Run the fridge for 2-3 hours (4+ in summer) before adding food.
Show more Show less
Specs in practice
- Energy Rating
- 4 Stars
Images and diagrams
- The temperature control knob is located inside the fridge.
- MAX setting lowers the internal temperature.
- MIN setting increases the internal temperature.
- OFF setting turns the unit off.
Model compatibility
- Freestanding design only; do not recess or build-in.
- Ambient temperature must be between 16°C and 38°C.
Manual page author
Emily Carter
User documentation editor