Quick Start Guide for Stirling 239L Upright Fridge STR-H239W

Quick start guide for the Stirling 239L Upright Fridge (STR-H239W). Includes installation steps, thermostat settings, interior organization, and first-use instructions.

Quick answers from the manual

Quick answer

The Stirling 239L Upright Fridge (STR-H239W) requires a 4-hour settling period before first use, followed by a 2-hour cool-down period on the coldest setting (7). p. 1

Key actions

Let the fridge stand upright for 4 hours before plugging in. p. 1
Cool down the unit on the coldest setting (7) for 2 hours before adding food. p. 1

First start

Clean the interior, ensure proper clearance, let stand for 4 hours, then cool for 2 hours on setting 7. p. 1

Show 3 more answers Show less

Maintenance and reset

To switch off, turn the thermostat to 0 and disconnect the power cord. p. 2

Technical specifications

Parameter	Value	Meaning	Pages
Clearance	12cm back, 5cm sides	Required space for air circulation	p. 1

Where to find it in the PDF

Installation and Connection p. 1
Thermostat and Interior p. 2

Table of contents

Manual images

Click an image to enlarge

Page 1

Interior view of the fridge showing shelves and crisper drawers.

Page 2

Quick guide from the manual

This guide provides essential information for setting up and using your Stirling 239L Upright Fridge (STR-H239W). It covers installation, initial cooling, thermostat operation, and interior organization.

Installation

The fridge is designed for freestanding use. Ensure the floor is strong, sturdy, and level. Adjust the leveling feet if necessary.

Placement: Avoid areas exposed to direct sunlight, heat, extreme cold, or excessive moisture. Installing in the coolest area of the room improves energy efficiency.
Clearance: Allow at least 12cm of clear space at the back and 5cm at the sides for proper air circulation.
Cleaning: Before use, wipe interior surfaces and accessories with a cloth moistened with lukewarm water and a little baking soda. Dry thoroughly.

Connection and first start

Follow these steps to ensure the fridge operates correctly:

Settling: Let the fridge stand upright for at least 4 hours before plugging it in to allow refrigerant gases to settle.
Power: Plug in the fridge and secure the power cord behind the unit, ensuring the plug remains accessible.
Cool down: Before adding food, allow the unit to cool down on the coldest setting (7) for at least 2 hours.

Thermostat control

The temperature control dial is located on the upper right-hand side of the cabinet interior.

Settings: The higher the number (up to 7), the colder the temperature.
First use: Set the control to the coldest position (7) initially. After 24 to 48 hours, adjust to a middle setting that suits your needs.
Switching off: Turn the dial to the minimum position (0) to stop the cooling cycle, then disconnect the power cord.

Fridge interior

The refrigerator compartment is designed for short-term storage of fresh food.

Shelves: The walls have runners allowing you to position glass shelves to suit your storage requirements.
Crisper drawers: Two glass-covered drawers are provided to keep fruit and vegetables fresh.
Door racks: These can be adjusted to different heights. Pull the racks up and out to reposition them securely.

Support

If you require further assistance, please contact After Sales Support at 1300 886 649.

Practical help

Common problems

Fridge smells like a new product

Wipe the interior surfaces and accessories with a cloth moistened with lukewarm water and a little baking soda, then dry thoroughly.

Fridge not cooling enough

Ensure the thermostat is set to a higher number (up to 7) and check that there is sufficient clearance (12cm back, 5cm sides) for air circulation.

Before use

Ask for assistance when moving the fridge as it is heavy.
Wipe interior surfaces with water and baking soda.
Ensure the floor is level and adjust leveling feet if needed.
Allow 12cm clearance at the back and 5cm at the sides.
Let the fridge stand upright for 4 hours before plugging in.
Cool down on setting 7 for 2 hours before adding food.

Show more Show less

Specs in practice

Thermostat 0: Off position; stops the cooling cycle.
Thermostat 7: Coldest setting.
Settling time: 4 hours required for refrigerant gases to stabilize in the compressor.

Images and diagrams

The thermostat dial is located on the upper right-hand side inside the fridge cabinet.
Shelves and door racks are adjustable by sliding them along the runners on the interior walls.

Model compatibility

Designed for freestanding use only.

Manual page author

David Miller

Documentation analyst

Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.