Home Appliances / Space Heaters
User Manual for Flama 2335FL Micathermic Heater
Quick guide for the Flama 2335FL Micathermic Heater. Includes assembly instructions, operation steps, safety warnings, maintenance tips, and technical specifications.
PDF source: Français · summary: English
Quick answers from the manual
Quick answer
- To operate the Flama 2335FL, assemble the feet, plug it into a grounded socket, set the thermostat to MAX, and select the desired power level (I or II). p. 15
Key actions
- Assemble the feet p. 15
- Set power level p. 15
First start
- Unwind the cord, plug into a grounded socket, set thermostat to MAX, and select power level. p. 15
Show 4 more answers Show less
Problems and fixes
Overheating
Turn off and wait 30 minutes before restarting.
p. 14Maintenance and reset
- Unplug and allow to cool before cleaning. Keep grilles free of dust. p. 15
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Nominal heating output | 2.0 kW | Maximum power output | p. 16 |
| Anti-frost threshold | 5°C | Automatic activation temperature | p. 15 |
Where to find it in the PDF
- Parts Diagram p. 2
- Safety Instructions p. 13, 14
- Operating Instructions p. 15
Table of contents
Quick guide from the manual
The Flama 2335FL is a micathermic heater designed for indoor use. Before first use, ensure the device is assembled correctly and placed on a flat, stable surface. Always ensure the voltage of your power supply matches the rating on the device.
Description
- 1. Grille
- 2. Power level selector
- 3. Thermostat control knob
- 4. Lighted indicator
- 5. Feet with caster wheels
- 6. Cord wrap
- 7. Handle
Assembling the feet
The feet must be attached before using the heater:
- Place the feet at both ends of the bottom part of the appliance.
- Align the openings on the feet with the hubs located underneath the appliance.
- Screw the feet securely into place.
Operating instructions
Follow these steps to operate the heater:
- Fully unwind the power cord from the cord wrap.
- Plug the appliance into a grounded wall socket.
- Turn the thermostat control knob clockwise to the maximum (MAX) position.
- Set the power level selector to the desired position:
- Position 0: Off
- Position I: Minimum power
- Position II: Maximum power
- The lighted indicator will turn on when the heater is active.
- Once the desired room temperature is reached, turn the thermostat knob counterclockwise until the indicator light turns off. The thermostat will then maintain the temperature automatically.
Anti-frost function
When the thermostat is set to the anti-frost (*) position and the power selector is active, the heater will automatically turn on if the ambient temperature drops below 5°C.
Maintenance and cleaning
Always unplug the appliance and allow it to cool down completely before cleaning. Keep the air intake and outlet grilles free of dust and lint. Clean the exterior with a soft, dry cloth. Do not use abrasive products, chemicals, or metallic scouring pads, as these can damage the surface.
Safety warnings
- Do not cover the appliance to avoid overheating.
- Keep the heater away from showers, bathtubs, sinks, or swimming pools.
- Do not immerse the heater in water or any other liquid.
- Do not place the heater directly under a power socket.
- If the heater overheats, the integrated safety system will stop operation. Turn it off and wait 30 minutes before restarting.
- Keep children under 8 years old away from the appliance unless supervised.
Manufacturer information
FLAMA, SA
Practical help
Common problems
Heater does not turn on
Ensure the device is plugged into a grounded socket and the thermostat is set correctly.
Overheating
The safety system has triggered. Turn off the device and wait 30 minutes before attempting to restart.
Before use
- Ensure the mains voltage matches the rating plate.
- Verify the socket is properly earthed.
- Assemble the feet securely.
- Place the heater in an upright position.
- Fully unwind the power cord.
Show more Show less
Specs in practice
- Nominal heating output
- 2.0 kW maximum power capacity.
Images and diagrams
- The parts diagram identifies the grille, power selector, thermostat knob, indicator light, feet, cord wrap, and handle.
Model compatibility
- For indoor use only.
- Must be connected to a grounded (earthed) socket.
Manual page author
David Miller
Documentation analyst