Electronics / Audio
Flamma FC15 Analog Flanger Pedal Owner's Manual
Quick guide for the Flamma FC15 Analog Flanger Pedal, covering setup, control functions, effect modes, and technical specifications.
Table of contents
Quick guide from the manual
The Flamma FC15 is a compact analog flanger pedal featuring a metal shell and true bypass circuit. It offers two distinct effect modes: Normal and Filter. To operate, connect a 9V DC center-negative power supply and use 1/4 inch mono cables for input and output.
Layout and controls
- Footswitch: Turns the pedal effect on or off.
- LED Indicator: Shows the current status of the pedal.
- DC IN: Port for the 9V DC power adapter.
- INPUT/OUTPUT: 1/4 inch mono audio jacks for instrument connection.
- Mode Toggle: Switches between Normal and Filter effect modes.
- COLOR: Adjusts the feedback of the flanger effect.
- RANGE: In Normal mode, adjusts the sweeping scope limit; in Filter mode, adjusts the filter matrix.
- RATE: Adjusts the speed of the flanger in Normal mode (not functional in Filter mode).
Safety and precautions
Always use the original 9V DC center-negative power supply. Do not operate the device near water, heat sources, or ventilation openings. Clean the unit only with a dry cloth. Ensure the power cord is protected from being walked on or pinched.
Technical specifications
- Input: 1/4 inch mono jack (1M ohms impedance)
- Output: 1/4 inch mono jack (510 ohms impedance)
- Power Requirements: 9V DC, center negative
- Current Draw: 10mA
- Dimensions: 47mm (D) x 83mm (W) x 52mm (H)
- Weight: 160g
Practical help
Common problems
RATE knob does not change the sound.
The RATE knob is disabled when the pedal is set to Filter mode. Switch to Normal mode to use this control.
Pedal does not power on.
Ensure you are using a 9V DC center-negative power supply and that it is properly connected to the DC IN port.
Before use
- Verify the power supply is 9V DC, center negative.
- Ensure you have 1/4 inch mono instrument cables.
- Check that the pedal is placed on a stable surface away from heat sources.
- Confirm the pedal is not being used near water.
Specs in practice
- Current Draw: 10mA
- The amount of electrical current the pedal requires to function; ensure your power supply can provide at least this amount.
- Impedance (Input: 1M ohms)
- Standard high-impedance input designed to preserve the signal quality of electric guitars.
Model compatibility
- Requires 9V DC center-negative power supply only.
- Compatible with standard 1/4 inch mono instrument cables.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.