Documents / Terms Conditions
Owner's Manual for Flamma FV01 Vocal Pitch Correction Pedal
Quick guide for the Flamma FV01 vocal pedal, covering pitch correction, reverb and delay settings, output modes, and technical specifications.
Table of contents
Quick guide from the manual
The Flamma FV01 is a vocal pitch correction pedal designed for live performance and studio use. It features built-in reverb and delay effects, three vocal tone modes, and support for 48V phantom power. The device can function as a microphone amplifier or a traditional stompbox.
Device layout
The pedal features a main control panel with knobs for Reverb, Delay, and Correction levels, a Tone button for mode selection, and a footswitch for toggling effects. The rear panel contains the MIC input, XLR output, Guitar input/output, 48V power switch, and DC power input.
Operation and settings
- Reverb: Offers three types (RM - Room, HL - Hall, PL - Plate). Adjust volume with the REVERB knob.
- Delay: Offers three types (TP - Tape, DG - Digital, SL - Slap). Adjust volume with the DELAY knob. Use the footswitch in Hidden Mode to set tap tempo.
- Vocal Tone: Press the TONE button to cycle through modes: Normal (LED off), WARM (Red LED), and BRIGHT (Blue LED).
- Footswitch: Press to toggle effects on/off. Press twice quickly to turn off all effects. Hold to enter/exit Hidden Mode.
Output modes
The FV01 supports two output modes:
- Individual mode: Guitar signal goes to GUITAR OUT, microphone signal goes to XLR OUT.
- Mixed mode: Both signals are mixed and sent to both outputs.
To change the mode, power off the device, then hold the footswitch while powering it on. Blinking Blue indicates Individual mode; blinking Red indicates Mixed mode.
Safety and power
Use only a 9V DC 500mA center-negative power adapter. Do not use the device near water or heat sources. Ensure proper ventilation and protect the power cord from damage.
Technical specifications
- Inputs: 1/4 inch mono (Guitar), XLR balanced (Mic).
- Outputs: 1/4 inch mono (Guitar), XLR balanced.
- Power: 9V DC, 500mA.
- Dimensions: 86.6 x 125 x 60 mm.
- Weight: 0.371 kg.
Practical help
Common problems
Effects are not turning off
Press the footswitch twice quickly when the effects are active to turn them all off.
Need to change output mode
Power off the pedal, then hold the footswitch while powering it back on. Blinking Blue is Individual mode, blinking Red is Mixed mode.
Delay timing is incorrect
Enter Hidden Mode by holding the footswitch, then tap the footswitch multiple times at your desired tempo.
Before use
- Ensure you are using a 9V DC 500mA center-negative power adapter.
- Check that the device is not placed near heat sources or ventilation openings.
- Verify that your microphone is connected to the MIC input if using phantom power.
- Confirm the desired output mode (Individual vs Mixed) before starting your performance.
Specs in practice
- 48V Phantom Power
- Required for condenser microphones; toggle on/off using the switch on the rear panel.
- Impedance (Guitar In)
- 1M ohms, standard for high-impedance instrument signals.
- Current Draw
- 500mA; ensure your power supply meets this requirement to avoid performance issues.
Model compatibility
- Supports 48V phantom power for professional microphones.
- Compatible with standard 1/4 inch instrument cables for guitar input/output.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.