Electronics / Audio
Flamma FC19 Distortion Pedal Owner's Manual
Quick guide for the Flamma FC19 Distortion Pedal, covering setup, control layout, effect modes, and technical specifications.
Table of contents
Quick guide from the manual
The Flamma FC19 is a compact distortion pedal designed to provide warm, smooth, vintage tones. It features two distinct effect modes (Vintage and Turbo) and a true bypass circuit. This document provides essential information for safe operation and proper connection of the device.
Safety and Power Supply
Before using the pedal, ensure you are using a power adapter that meets the following requirements:
- Voltage: 9V DC
- Polarity: Center negative
- Usage: Use only the original power supply. Unplug the adapter during electrical storms or when the device is not in use.
Do not operate the device near water, heat sources, or in areas with poor ventilation. Clean the unit only with a dry cloth.
Device Layout
The FC19 features the following controls and connections:
- Footswitch: Turns the pedal on or off.
- LED Indicator: Shows the current On/Off status.
- DC IN: Connection for the 9V power supply.
- INPUT: 1/4 inch mono audio jack for your instrument.
- OUTPUT: 1/4 inch mono audio jack for your amplifier or next pedal.
- Mode Toggle: Switches between Vintage and Turbo effect modes.
- LEVEL: Adjusts the output volume of the distortion.
- FILTER: Adjusts the tone color of the distortion.
- GAIN: Adjusts the intensity of the distortion effect.
Technical Specifications
- Input Impedance: 1M ohms
- Output Impedance: 1k ohms
- Current Draw: 3mA
- Dimensions: 93.5mm (D) x 42mm (W) x 52mm (H)
- Weight: 160g
Practical help
Common problems
Pedal does not turn on
Verify that the power adapter is 9V DC, center negative, and properly connected to the DC IN jack.
No sound output
Ensure the footswitch is engaged (LED on), cables are securely connected to INPUT/OUTPUT, and the LEVEL knob is turned up.
Before use
- Ensure the power source is 9V DC, center negative.
- Use high-quality 1/4 inch mono instrument cables.
- Place the pedal on a stable surface away from heat sources.
- Check that the pedal is not being used near water.
Specs in practice
- Input Impedance (1M ohms)
- Standard high impedance for guitar pickups to maintain signal clarity.
- Current Draw (3mA)
- Very low power consumption, compatible with most standard pedalboard power supplies.
Model compatibility
- Requires 9V DC center negative power supply.
- Compatible with standard 1/4 inch mono instrument cables.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.