GE LED 1000 Lights Safety and Care Guide
Safety and care instructions for GE LED 1000 Lights (Models 23126LO, 24118LO). Learn how to safely install, maintain, and store your holiday lighting set.
Quick answers from the manual
Quick answer
- This document provides safety and care instructions for GE LED 1000 Lights (Models 23126LO, 24118LO). It emphasizes indoor use, proper tree maintenance, and inspection procedures to prevent fire or electric shock. p. 1
Key actions
- Inspect product before use p. 1
- Store in a cool, dry place p. 1
Problems and fixes
Reorient antenna, increase separation, or consult a technician.
p. 1Show 2 more answers Show less
Maintenance and reset
- Discard damaged products p. 1
Where to find it in the PDF
- Safety and Care Instructions p. 1
Table of contents
Important Information
This document provides essential safety and care instructions for the GE LED 1000 Lights (Models 23126LO and 24118LO). These lights are designed for indoor use only and are not intended for permanent installation.
Safety Instructions
To reduce the risk of fire, burns, personal injury, and electric shock, please observe the following precautions:
- Indoor Use Only: Do not use seasonal products outdoors unless marked suitable for both indoor and outdoor use.
- Heat Sources: Do not mount or place the lights near gas or electric heaters, fireplaces, candles, or other similar heat sources.
- Wiring Safety: Do not secure the wiring with staples or nails, or place it on sharp hooks. Do not close doors or windows on the product or extension cords, as this may damage the wire insulation.
- Operation: Unplug the product when leaving the house, retiring for the night, or if left unattended.
- Not a Toy: Keep the product out of reach of small children.
- Modifications: Do not attempt to replace lamps or modify the light string.
Use and Care
If you are using these lights on a live tree, please follow these guidelines:
- Tree Maintenance: Ensure the tree is fresh and well-maintained. Do not use on trees where needles are brown or break off easily.
- Watering: Keep the tree holder filled with water.
- Stability: Ensure the tree is well-secured and stable.
- Inspection: Before using or reusing the product, inspect it carefully. Discard any product that has cut, damaged, or frayed wire insulation, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
- Storage: When not in use, remove the product carefully from the tree or branches to avoid strain on the conductors and wires. Store in a cool, dry location protected from sunlight.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that the device does not cause harmful interference and must accept any interference received. If the equipment causes interference to radio or television reception, try reorienting the antenna, increasing the separation between the equipment and the receiver, or connecting the equipment to a different circuit.
Customer Support
For questions or assistance, call customer service at 1-877-398-7337 or visit www.geholidaylighting.com.
Official resources from the manual
Practical help
Common problems
Discard the product immediately; do not attempt to repair.
Reorient or relocate the receiving antenna, increase separation between the equipment and receiver, or consult a technician.
Before use
- Inspect for cut, damaged, or frayed wire insulation
- Check for cracks in lampholders or enclosures
- Ensure there are no loose connections
- Verify there is no exposed copper wire
- If using on a live tree, ensure the tree is fresh and well-watered
Show more Show less
Model compatibility
- Indoor use only
- Not for permanent installation
Manual page author
Michael Turner
Technical manual editor