User Manual for GE 23142LO 7.5-ft Pre-lit Artificial Tree

Quick guide for the GE 23142LO 7.5-ft pre-lit artificial tree. Includes safety instructions, lamp replacement steps, remote control operation, and troubleshooting tips.

Quick answers from the manual

Quick answer

The GE 23142LO is a 7.5-ft pre-lit artificial tree. The manual covers safety, lamp replacement (3.3V, 0.066W LEDs), remote control operation (CR2025 battery), and troubleshooting for lighting issues. p. 1

Key actions

Replace a burnt-out lamp p. 1
Activate the remote control p. 1

First start

Remove the plastic film from the remote battery cover to energize the remote. p. 1

Show 4 more answers Show less

Problems and fixes

Product does not light

Check for loose LEDs, ensure connectors are fully inserted, and check the foot pedal position.

p. 1

Maintenance and reset

Replace bad LEDs as soon as you find them. p. 1

Technical specifications

Parameter	Value	Meaning	Pages
Lamp Voltage	3.3V	Required voltage for replacement LEDs	p. 1
Lamp Wattage	0.066W	Required wattage for replacement LEDs	p. 1
Battery	CR2025	Battery type for remote	p. 1

Where to find it in the PDF

Safety, Maintenance, and Troubleshooting p. 1

Table of contents

Quick guide from the manual

This manual provides essential safety, maintenance, and operational instructions for the GE 23142LO 7.5-ft pre-lit artificial tree. Key operations include replacing individual LED lamps and using the included remote control for light patterns.

Safety Instructions

For indoor use only. Follow these precautions to ensure safe operation:

Do not use near gas or electric heaters, fireplaces, candles, or other heat sources.
Do not secure wiring with staples or nails, or place on sharp hooks.
Unplug the product when leaving the house, retiring for the night, or if left unattended.
Do not hang ornaments or other objects from the cord, wire, or light string.
Do not cover the product with cloth, paper, or any material when in use.
This is an electric product, not a toy. Keep out of reach of small children.

Use and Care

Before using or reusing, inspect the product carefully. Discard any products with cut, damaged, or frayed wire insulation, cracks in lampholders, or loose connections.
When not in use, store the product neatly in a cool, dry location protected from sunlight.
When storing, remove the product carefully from branches to avoid strain on conductors and wires.

Replacing Lamps

If a lamp burns out, follow these steps:

Unplug the set from the outlet.
Pull the lamp and plastic base straight out of the lampholder.
Replace the lamp with a 3.3 Volt, 0.066 Watt LED type lamp (provided with the product).
If the new base does not fit, remove the base of the burned-out lamp by straightening the leads and pulling the lamp out. Thread the leads of the new lamp through the holes in the old base, bend each lead up, and insert it into the lampholder.

Remote Control Operation

The remote control allows you to turn the lights on/off and change light patterns.

Battery: Requires a CR2025 lithium battery.
Setup: Pull out the plastic film from the battery cover to energize the remote.
Operation: Use the ON/OFF button to toggle power and the Function button to cycle through light patterns.

Troubleshooting

If the product does not light, check the following:

Ensure all LEDs are pushed firmly into their sockets (do not twist).
Check that all male/female connectors are fully inserted and the securing cap is tightened.
Verify the foot pedal is in the 'on' position.
If an LED is missing or fails to light, replace it with a spare LED included with the product.

Practical help

Common problems

Product does not light

Check if LEDs are loose, connectors are fully inserted, or the foot pedal is in the 'off' position.

LED missing

Mark the socket with tape, unplug the set, and replace the LED with a spare.

LED fails to light

Replace the bad LED with a spare.

Before use

Inspect product for damaged wires or loose connections.
Ensure the tree is well secured and stable.
Remove plastic film from the remote battery cover.
Ensure all LEDs are pushed firmly into sockets.
Verify all connectors are fully inserted.

Show more Show less

Specs in practice

Battery Type: CR2025 Lithium battery.

Images and diagrams

Remote control buttons for brightness and color modes.
Battery compartment access for the remote.

Model compatibility

For indoor use only.
Do not use with other light sets.

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.