Power / Batteries Chargers
Hama 00201993 USB-C PD Plus Mini Charger User Guide
Quick guide for the Hama 00201993 USB-C PD Plus Mini Charger, including safety instructions, operation steps, technical specifications, and power output details.
Table of contents
Quick guide from the manual
This document provides essential information for the Hama 00201993 Mini Charger. It is designed for indoor use only, in dry rooms, and under moderate climatic conditions. Always ensure the total power consumption of connected devices does not exceed the charger's limits.
Operation
The charger is compatible with mains voltages of 100-240 V, making it suitable for worldwide use (a country-specific adapter may be required). It supports Power Delivery (PD) and Quick Charge (QC) 3.0/2.0 for automatic voltage and power adjustment.
- Connect your device to the charger using a suitable USB cable.
- Plug the charger into a properly installed and easily accessible mains socket.
- The charging progress is indicated on your device.
- Disconnect the device when charging is complete or to interrupt the process.
- Unplug the charger from the mains after use.
Safety instructions
- Keep the product out of the reach of children.
- Do not use the product in damp environments or near heat sources.
- Do not drop the product or expose it to major shocks.
- Do not modify the device; doing so voids the warranty.
- Do not use the product if it is visibly damaged or if the cables are damaged.
- Always pull the plug directly, never the cable.
Care and maintenance
Use only soft, dry towels to clean the product. Always disconnect the device from the mains before cleaning or if it will not be used for a prolonged period.
Technical data
The charger supports a maximum output of 45 W. Note the following power distribution:
- USB-C only: Max. 45 W.
- USB-A and USB-C simultaneously: USB-C max. 30 W, USB-A max. 12 W.
For detailed output voltage and current specifications, please refer to the technical data section in the full manual.
Manufacturer information
Hama GmbH & Co KG
Practical help
Common problems
Device not charging
Ensure the charger is securely plugged into a working mains socket and that the USB cable is properly connected to both the charger and the device.
Charging is slow or not optimized
Ensure your device supports Power Delivery (PD) or Quick Charge (QC) 3.0/2.0. If the device does not support these, it will charge at a standard rate.
Charger feels warm
It is normal for chargers to become warm during operation. Ensure it is used in a well-ventilated area and not covered.
Before use
- Check that the mains voltage is between 100-240 V.
- Ensure the total power of connected devices does not exceed 45 W.
- Verify that the USB cable is in good condition.
- Ensure the wall socket is easily accessible.
Specs in practice
- Input Voltage
- 100-240 V, allowing for worldwide use with appropriate adapters.
- Output Power (USB-C only)
- Maximum 45 W for fast charging compatible devices.
- Output Power (Simultaneous)
- USB-C provides 30 W and USB-A provides 12 W when both are used.
Model compatibility
- Requires devices to support PD or QC 3.0/2.0 for optimized charging.
- Not all devices with different firmware versions may fully support PD/QC functions.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.