Assembly Instructions for Home Accents Holiday 3-Piece Ice Shimmer LED Snowman Family

Important Information

This manual provides instructions for the 3-Piece Ice Shimmer LED Snowman Family (Model 22RT19922141). The product is intended for residential seasonal use for a maximum of 90 days per year. Please read the entire manual before beginning assembly and verify all parts against the parts list.

Assembly Instructions

It is recommended to assemble the product on a flat surface or table. Assembly may require more than one person.

Mother Snowman

• Body: Align the two halves of the Upper Body (D) and Lower Body (E). Insert connecting rods into the holes and fasten with Plastic Ties (R).
• Head/Hat/Arms: Insert the connecting rods at the bottom of Head (B) into the top of the Upper Body (D). Insert Hat (A) into the top of Head (B). Attach Arms (C) to the Body (D) and secure with Plastic Ties (R).

Child Snowman

• Body: Align the two halves of the Body (I), insert connecting rods, and fasten with Plastic Ties (R).
• Head/Hat/Arms: Insert the connecting rods at the bottom of Head (G) into the top of the Body (I). Insert Hat (F) into the top of Head (G). Attach Arms (H) to the Body (I) and secure with Plastic Ties (R).

Father Snowman

• Body: Align the two halves of the Upper Body (M) and Lower Body (N). Insert connecting rods and fasten with Plastic Ties (R).
• Head/Hat/Arms: Insert the connecting rods at the bottom of Head (K) into the top of the Upper Body (M). Insert Hat (J) into the top of Head (K). Attach Arms (L) to the Body (M) and secure with Plastic Ties (R).

Finishing Touches

• Scarves: Wrap the Scarves (O) around the necks of the three snowmen.
• Ground Stakes: Insert the Ground Stakes (S) over the metal frame at the four ground connecting loops on the bottom of each snowman and push firmly into the ground.

Safety and Pre-Operation

• The lighting string is rated at 12 Watts (0.1 Amps). Do not overload.
• Do not connect to other lighting strings, decorative outfits, or other electrical products.
• Grasp the plug to insert or remove from the power source; do not pull on the cord.
• Inspect the product carefully before use. Discard or return if there are cuts, damage, frayed wire insulation, cracks in socket enclosures, loose connections, or exposed copper wire.

Care and Cleaning

• Carefully remove the product from its location to avoid strain on connections and wires.
• Disassemble the unit carefully, ensuring no electrical wires are cut.
• Wipe the unit with a damp cloth and allow it to dry completely before storing.
• Store in a cool, dry location protected from sunlight.

Troubleshooting

• Ensure the surface is flat and level.
• Verify the item is plugged correctly into a wall outlet or UL Listed Power Cord.
• Check that all parts are assembled properly.
• If the item does not light, check for loose or broken bulbs and connections.
• If the item has multiple light string cords, ensure all are plugged in.
• Check for a broken or burned-out fuse in the plug.

Warranty Information

This product is covered by a 90-day limited guarantee due to defects in material and workmanship. The warranty does not cover commercial use, normal wear and tear, burn out of bulbs or LEDs, batteries, unauthorized repairs, or damage caused by shipping, misuse, or accidents.