User Manual for 9ft Barbour Spruce LED Pre-Lit Tree Home Accents Holiday 22HD20053

Quick Guide

This guide provides instructions for the 9ft Barbour Spruce LED Pre-Lit Tree. Key steps include assembling the tree sections, shaping the branches, and operating the lighting modes via the remote control or the control box on the cord.

Safety Information

• This product is for indoor use only.
• Do not connect extra light sets, tree toppers, or other electrical items to the existing light sets.
• Do not place the tree near gas or electric heaters, fireplaces, candles, or other similar combustible sources.
• Unplug the product when leaving the house or when left unattended.
• Do not hang ornaments or other objects from the cord, wire, or light string.
• Keep small children away from the product.

Assembly

Preparing the tree and stand:

• Lay each of the three tree sections on the ground in alphabetical order.
• Remove the plastic protective caps from the end of each pole. Save these caps for storage.
• Open the metal stand to form an X shape. Line up the hole on the tube of the stand and thread the eyebolt through until it is flush with the inside of the tube.
• Ensure the stand is on a stable and even space.

Assembling the tree:

• Place tree section C firmly into the stand and secure it with the eyebolt.
• Insert tree section B into the top of section C, followed by section A.
• Shape the tree sections to create the desired appearance by bending tips downward and upward to fill in any gaps.

Operation

To turn the lights on, plug the cord into an outlet. You can control the lights using the remote control or the control box on the outlet cord.

Lighting Options:

• Steady Warm White
• Steady Multi
• Slow Twinkle Warm White
• Slow Twinkle Multi
• Slow Twinkle Warm White to Multi
• Fast Twinkle Warm White
• Fast Twinkle Multi
• Fast Twinkle Warm White to Multi
• Flashing Warm White To Multi
• Off

The remote control requires a CR2025 battery (included). Pull the tab out of the battery compartment to activate.

Care and Storage

• Before disassembling, unplug the tree and remove all ornaments.
• Gently lift each section straight up to remove it. Fold branches towards the pole.
• Use the protective caps to cover the poles to avoid damaging internal parts.
• Store in a cool, dry location protected from sunlight, out of reach of pets and children.

Troubleshooting

If the tree does not light up when plugged in, check to ensure all tree sections are securely connected to each other. Press the On/Off button on either the remote control or the control box on the plug.