Home / Seasonal Decorations
User Guide for Home Accents Holiday 22HD20001C 7.5ft Barbour Spruce LED Pre-Lit Tree
Quick guide for the Home Accents Holiday 22HD20001C 7.5ft Barbour Spruce LED Pre-Lit Tree. Includes assembly instructions, lighting operation, remote control usage, and storage tips.
Quick answers from the manual
Quick answer
- The 7.5ft Barbour Spruce LED Pre-Lit Tree is assembled by setting up the metal stand and stacking the three tree sections (C, B, A). Lighting is managed via the remote control or the control box on the power cord. p. 4, 5
Key actions
- Assemble the tree by placing section C into the stand, followed by B and A. p. 4
- Activate the remote by pulling the battery tab. p. 5
First start
- Assemble the stand, insert tree sections, plug into an outlet, and activate the remote. p. 4, 5
Show 4 more answers Show less
Problems and fixes
Tree does not light
Check connections between sections and press the On/Off button on the remote or control box.
p. 5Maintenance and reset
- Unplug the tree, remove ornaments, fold branches, and use protective caps for storage. p. 5
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Input | 120V, 60Hz | Power requirements | p. 2 |
| Output | 29V, 0.28A, 8W | Power output | p. 2 |
| Remote Battery | CR2025 | Battery type | p. 5 |
Where to find it in the PDF
- Safety Information p. 2
- Pre-Assembly p. 3
- Installation p. 4
- Operation p. 5
- Care and Storage p. 5
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This guide provides essential information for the assembly, operation, and maintenance of the 7.5ft Barbour Spruce LED Pre-Lit Tree. Always ensure the tree is placed on a stable surface and used indoors only.
Safety Information
- Indoor Use Only: This product is not intended for permanent installation or outdoor use.
- Electrical Safety: The transformer is rated at 120V, 60Hz (input) and 29V, 0.28A, 8W (output).
- Usage Restrictions: This is not a toy. Keep away from small children. Do not hang ornaments on the cord or light string.
- Fire Safety: Do not mount or place the tree near gas or electric heaters, fireplaces, candles, or other similar combustible sources.
- Unplugging: Always unplug the product when leaving the house, retiring for the night, or if left unattended.
Assembly Instructions
- Prepare the Stand: Open the metal stand (D) to form an "X" shape. Ensure it is on a stable, even surface.
- Secure the Stand: Thread the eyebolt screw (E) through the stand until you feel the end of the eyebolt flush with the inside of the tube.
- Assemble Sections: Place tree section C firmly into the stand (D) and secure with the eyebolt. Insert tree section B into the top of section C, followed by tree section A.
- Shape the Tree: Shape the branches by bending tips downward and upward to fill in any gaps for a fuller appearance.
Operation
To turn the lights on, simply plug the cord into an outlet. You can control the lighting using the remote control or the control box located on the outlet cord.
- Remote Control: Pull the battery tab out of the battery compartment to activate. The remote requires a CR2025 battery.
- Lighting Modes: Use the buttons on the remote or the control box to cycle through available options, including Steady Warm White, Steady Multi, Slow Twinkle, Fast Twinkle, and Flashing modes.
Care and Storage
- Disassembly: Unplug the tree and remove all ornaments. Do not pull on the cord when unplugging.
- Storage: Lift the tree sections straight up to separate them. Fold branches towards the pole.
- Protection: Use the original plastic protective caps on the poles to avoid damaging internal parts. Store in a cool, dry location protected from sunlight.
Manufacturer information
Home Accents Holiday
Practical help
Common problems
The tree does not light up when plugged in.
Check to ensure all tree sections are securely connected to each other. Press the On/Off button on either the remote control or the control box on the plug.
Before use
- Check all parts against the package contents list (Sections A, B, C, Stand D, Eyebolt E, Remote F, Replacement Bulbs G).
- Ensure the stand is placed on a stable, even surface.
- Remove plastic protective caps from the ends of the poles.
- Ensure you have a CR2025 battery for the remote control.
- Verify the tree is located away from heat sources like fireplaces or heaters.
Show more Show less
Specs in practice
- Output Power
- 29V, 0.28A, 8W
- Remote Battery
- CR2025
Images and diagrams
- The assembly diagram shows the stacking order: Stand (D) at the bottom, followed by Section C, Section B, and Section A at the top.
- The control box is attached to the power cord and features buttons for lighting control.
Model compatibility
- Indoor use only.
- Not intended for permanent installation.
- Do not connect extra light sets or tree toppers to the existing light sets.
Manual page author
Michael Turner
Technical manual editor