Home / Seasonal Decorations
User Guide for Home Accents Holiday 22HD20051 7.5ft Barbour Spruce Slim LED Pre-Lit Tree
Quick guide for the Home Accents Holiday 22HD20051 7.5ft Barbour Spruce Slim LED Pre-Lit Tree. Includes assembly instructions, lighting operation, remote control usage, and storage tips.
Quick answers from the manual
Quick answer
- The 7.5ft Barbour Spruce Slim LED Pre-Lit Tree (22HD20051) is assembled by stacking three sections (A, B, C) into a metal stand. Lights are operated via a remote or control box on the power cord. p. 4, 5
Key actions
- Assemble the stand and stack tree sections A, B, and C. p. 4
First start
- Plug the cord into an outlet and use the remote or control box to turn on the lights. p. 5
Show 4 more answers Show less
Problems and fixes
Tree does not light
Check that all sections are securely connected and press the On/Off button on the remote or control box.
p. 5Maintenance and reset
- Use protective caps on pole ends during storage to prevent damage. p. 5
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Input | 120V, 60Hz | Power supply requirement | p. 2 |
| Output | 29V, 0.28A, 8W | Transformer output | p. 2 |
Where to find it in the PDF
- Safety Information p. 2
- Assembly Instructions p. 4
- Operation and Troubleshooting p. 5
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides instructions for the assembly, operation, and maintenance of the 7.5ft Barbour Spruce Slim LED Pre-Lit Tree (Model 22HD20051). The tree is designed for indoor use only and features multiple lighting modes controlled via a remote or the control box on the power cord.
Safety Information
- Indoor Use Only: This product is for decoration only and is not intended for permanent installation.
- Electrical Safety: Do not connect extra light sets, tree toppers, or other electrical items to the existing light sets.
- Fire Hazard: Do not mount or place the tree near gas or electric heaters, fireplaces, candles, or other similar combustible sources.
- Wiring: Do not secure the wiring with staples or nails. Unplug the product when leaving the house or if left unattended.
Assembly
- Prepare the Stand: Open the metal stand (D) to form an "X" shape. Ensure it is on a stable, even surface.
- Secure the Stand: Thread the eyebolt screw (E) through the stand until you feel the end of the screw flush with the inside of the tube.
- Assemble Sections: Place tree section C into the stand and secure it. Insert tree section B into the top of section C, followed by section A.
- Shape the Tree: Shape the branches to create the desired appearance, moving tips downward and upward to fill in gaps.
Operation
To turn the lights on, simply plug the cord into an outlet. You can control the lighting options using the remote control or the control box on the outlet cord.
- Remote Control: Requires a CR2025 battery (included). Pull the tab out of the battery compartment to activate.
- Lighting Modes: Use the buttons on the remote or the White button on the control box to cycle through: Steady Warm White, Steady Multi, Slow Twinkle Warm White, Slow Twinkle Multi, Slow Twinkle Warm White to Multi, Fast Twinkle Warm White, Fast Twinkle Multi, Fast Twinkle Warm White to Multi, Flashing Warm White To Multi, and Off.
Care and Storage
- Disassembly: Unplug the tree and remove all ornaments. Lift the tree top straight up to remove from the center section and fold all branches towards the pole.
- Storage: Use the protective caps on the pole ends to avoid damaging internal parts. Store in a cool, dry location protected from sunlight.
- Safety: Keep out of reach of pets and children.
Manufacturer information
Home Accents Holiday
Practical help
Common problems
Tree does not light up when plugged in
Ensure all tree sections are securely connected to each other. Press the On/Off button on either the remote control or the control box on the plug.
Before use
- Verify all parts (A, B, C, D, E, F, G) are present.
- Ensure the stand is on a stable, even surface.
- Remove plastic protective caps from the end of each pole.
- Ensure the remote has a CR2025 battery installed.
- Check that the tree is not placed near heat sources like fireplaces or heaters.
Show more Show less
Images and diagrams
- The assembly diagram shows the stacking order: Section C (bottom) into the stand, followed by Section B, then Section A (top).
- The control box and remote control are illustrated to show the location of the On/Off and mode selection buttons.
Model compatibility
- Do not connect extra light sets or tree toppers to this tree.
- For indoor use only.
Manual page author
David Miller
Documentation analyst