User Manual for Home Accents Holiday 23PG90078 Christmas Tree

Quick Guide: Getting Started

Your Christmas tree comes preset to Demo Mode. Before using the remote control to select light functions, you must deactivate this mode. To deactivate, ensure the tree is plugged in, then press the Demo Mode button on the remote or press and hold the Selector button on the in-line light controller for 5 seconds. The lights will flash 5 times to confirm Demo Mode is off.

Assembly Instructions

This tree features the Quick Set® design for easy assembly in under 10 minutes.

• Stand Assembly: Pull the legs of the stand apart until they snap into an x-shape. Place on a level surface. To close, press the metal button and fold the legs.
• Tree Assembly: Remove protective caps from the tree bottom and insert the pole into the stand. Do not step on the stand legs during setup. Continue inserting upper sections until the tree top is attached.
• Shaping: Work from the bottom to the top. Fan out branches in a star shape. Ensure wires are free of branch hinges. Once shaped, slightly upsweep branch tips for a uniform look.
• Power: Insert the adapter into a wall outlet.

Operation and Remote Control

The tree includes a dual-color light controller and a remote control. You can cycle through light effects using the Selector button on the in-line controller or by pressing the corresponding buttons on the remote. Available effects include various fading, steady, and alternating patterns (Warm White and Multicolor).

Maintenance and Care

• Lamp Replacement: Unplug the tree. Lift the lamp lock tab, pull the lamp and plastic base straight out of the holder, and replace with a new spare lamp provided with the product.
• Hinge Repair: If a hinge is loose, place the branch into the slot of the bracket, insert a new hinge pin through the holes, and secure with a washer.
• Storage: Unplug the tree and remove all ornaments. Lift sections apart, fold branches toward the pole, and store in a cool, dry location away from sunlight. Cover poles with protective caps to prevent damage.
• Battery Replacement: The remote uses a CR2032 battery. Press the button on the rear of the remote to release the battery tray, replace the battery (observing correct polarity), and slide the tray back in.

Safety Information

• Use only the provided power adapter.
• Do not use seasonal products outdoors unless marked for outdoor use.
• Unplug the product when leaving the house, retiring for the night, or if left unattended.
• Do not secure wiring with staples or nails.
• Keep away from heat sources like gas/electric heaters, fireplaces, or candles.
• Do not hang ornaments from the cord, wire, or light string.