Garden / Seasonal Decorations
Instruction Manual for Home Accents Holiday 22SV22944 Colossal Graveyard Spider
Quick guide for assembling and operating the Home Accents Holiday 22SV22944 Colossal Graveyard Spider. Includes battery installation, operation modes, and safety warnings.
Quick answers from the manual
Quick answer
- The Colossal Graveyard Spider is a motion-activated decoration powered by 4 x 1.5V C batteries. It features four operation modes: OFF, TIMER (6hr ON/18hr OFF), SENSOR (motion activated), and ON. p. 3
Key actions
- Install batteries into the head battery box before assembling the rest of the spider. p. 1
- Adjust joint tightness using the Big Hex Key. p. 2
First start
- Install 4 x 1.5V C batteries into the head unit, then set the switch on the control box to the desired mode. p. 3
Show 3 more answers Show less
Problems and fixes
Item does not work
Check batteries and ensure the switch is set to the desired mode.
p. 1, 3Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Batteries | 4 x 1.5V C | Power source | p. 3 |
| Sensor Range | 3.8m / 12.5ft | Motion detection distance | p. 3 |
Where to find it in the PDF
- Assembly Instructions p. 1, 2
- Operation and Safety p. 3
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Home Accents Holiday Colossal Graveyard Spider is a motion-activated decoration designed for indoor and outdoor use. It requires 4 x 1.5V C batteries (not included) to operate. The unit features a motion sensor with a range of up to 3.8m (12.5ft) and a timer function for automated operation.
Assembly Instructions
Before assembling, ensure you have all parts listed in the parts list. Install batteries into the battery box located in the head before assembling the rest of the unit.
- Base and Poles: Insert the support poles into the base.
- Head and Body: Attach the head to the poles.
- Legs: Attach the legs to the body. Ensure the legs with stake housings are placed in positions 2, 4, 5, and 7.
- Abdomen: Attach the abdomen to the body.
- Joint Adjustment: If the joints are loose, use the provided Big Hex Key to tighten the nuts. A clockwise motion tightens the joint; a counter-clockwise motion loosens it.
Operation Instructions
The control box allows you to select between four modes:
- OFF: Turns off lights and sound.
- TIMER: Operates on a 6-hour ON / 18-hour OFF cycle.
- SENSOR: Activates lights and sound when the motion sensor detects movement within 3.8m (12.5ft).
- ON: Continually operates lights and sound.
Battery Installation
Requires 4 x 1.5V C batteries (not included). Use a small Phillips head screwdriver to open the battery compartment cover. Ensure batteries are inserted with the correct polarity. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. Do not mix old and new batteries. Secure the cover with the screw, but do not overtighten.
Care and Storage
When not in use, store the product in its original packaging. Keep away from heat and moisture.
Safety Warnings
- This item is not a toy and should be used for decoration only.
- Contains small parts that can be a choking hazard.
- Keep all plastic and wire parts away from children.
- Children should be supervised by adults to prevent tipping hazards.
- Do not dispose of batteries in fire as they may explode or leak.
Manufacturer information
Home Accents Holiday
Practical help
Common problems
Item does not work
Check that the switch on the control box is set to the desired mode and that batteries are installed correctly with fresh 1.5V C batteries.
Motion sensor not triggering
Ensure nothing is blocking the sensor and that movement is within the 3.8m (12.5ft) range.
Joints are loose
Use the provided Big Hex Key to tighten the nuts at the joints. Turn clockwise to tighten.
Before use
- Verify all parts from the parts list are present.
- Obtain 4 x 1.5V C batteries (not included).
- Have a small Phillips head screwdriver ready.
- Ensure the assembly area is flat and level.
- Install batteries into the head battery box before full assembly.
Show more Show less
Specs in practice
- Battery Type
- Requires 4 x 1.5V C batteries.
- Motion Sensor Range
- Detects movement up to 3.8m (12.5ft) in front of the sensor.
Images and diagrams
- Figure 1.1 shows the battery box location in the head.
- Figure 2.1 illustrates the base and pole assembly.
- Figure 7.1 demonstrates how to use the hex key to adjust joint tightness.
Model compatibility
- Suitable for indoor and outdoor use.
Manual page author
David Miller
Documentation analyst